Off the top of my head isn't that the LPAR identifier? - 00 vs 01 - On Tue, Jul 12, 2011 at 7:51 AM, James Poirier <james.poir...@doit.nh.gov>wrote:
> Hi, > > This past weekend after an IPL of our z10 to apply RSU 5409 and a VTAM > ptf > I discovered that the reported CPUID in zVM had changed: > > CPUID prior to this weedend was : FF01C82620988000 > CPUID after IPL was : FF00C82620988000 > > The difference in the above id’s is 1C8262 to 0C8262. > > Also, made a change to MODE from s/390 to ZVM. > No IOCDS changes were made. > > After I discovered the changed CPUID I backed everything out and there was > no change in > the CPUID. I did finally put everything back and just dealt with the new > CPUID. > > Also found out that MCL’s had been applied to the HMC but not to the SE’s. > > Has anybody seen this behavior? > Thanks in advance > > > Jim Poirier > Senior zVM/zVSE Systems Programmer, > Mainframe Technical Support Group > Department of Information Technology > State of New Hampshire > 27 Hazen Drive > Concord, NH 03301 > 603-271-1535 Fax 603.271.1516 > > Statement of Confidentiality: The contents of this message are > confidential. > Any unauthorized disclosure, reproduction, use or dissemination (either > whole or in part) is prohibited. If you are not the intended recipient of > this message, please notify the sender immediately and delete the message > from your system. >