It appears that it probably is but we made no changes to affect the LPAR
id, also the HMC reports
that the CPUID is 1C8262 and that is what we used to get before this last
IPL.


On 7/12/11 11:02 AM, "Tom Huegel" <tehue...@gmail.com> wrote:

> Off the top of my head isn't that the LPAR identifier? - 00 vs 01 -
> 
> On Tue, Jul 12, 2011 at 7:51 AM, James Poirier <james.poir...@doit.nh.gov>
> wrote:
>> Hi,
>> 
>>     This past weekend after an IPL of our z10 to apply RSU 5409 and a VTAM
>> ptf 
>> I discovered that the reported CPUID in zVM had changed:
>> 
>>     CPUID prior to this weedend was :   FF01C82620988000  
>>     CPUID after IPL was                         :   FF00C82620988000
>> 
>> The difference in the above id¹s is 1C8262 to 0C8262.
>> 
>> Also, made a change to MODE from s/390 to ZVM.
>> No IOCDS changes were made.
>> 
>> After I discovered the changed CPUID I backed everything out and there was no
>> change in
>> the CPUID.  I did finally put everything back and just dealt with the new
>> CPUID.
>> 
>> Also found out that MCL¹s had been applied to the HMC but not to the SE¹s.
>> 
>> Has anybody seen this behavior?
>> Thanks in advance
>>  
>> 
>> Jim Poirier
>> Senior zVM/zVSE Systems Programmer,
>> Mainframe Technical Support Group
>> Department of Information Technology
>> State of New Hampshire
>> 27 Hazen Drive
>> Concord, NH 03301
>> 603-271-1535 <tel:603-271-1535>     Fax 603.271.1516 <tel:603.271.1516>
>> 
>> Statement of Confidentiality: The contents of this message are confidential.
>> Any unauthorized disclosure, reproduction, use or dissemination (either
>> whole or in part) is prohibited. If you are not the intended recipient of
>> this message, please notify the sender immediately and delete the message
>> from your system.
> 
> 


Jim Poirier
Senior zVM/zVSE Systems Programmer,
Mainframe Technical Support Group
Department of Information Technology
State of New Hampshire
27 Hazen Drive
Concord, NH 03301
603-271-1535    Fax 603.271.1516

Statement of Confidentiality: The contents of this message are confidential.
Any unauthorized disclosure, reproduction, use or dissemination (either
whole or in part) is prohibited. If you are not the intended recipient of
this message, please notify the sender immediately and delete the message
from your system.

Reply via email to