You wrote:
"[...] is there a tool that we can use to select only the fungal hyphae
of the emulsion surface?"
A tool?
There may be methods / approaches to reduce the impact of image
artifacts and to more or less isolate the structures of interest but, as
mentioned before, without typical images, I see no way to provide
substantial help.
Good luck
Herbie
:::::::::::::::::::::::::::::::::::::::::::::
Am 02.06.26 um 14:26 schrieb Moraitou Themis:
Thank you very much Herbie!
Just one more question...
Since our images have been taken using transmitted light, and the surface
of a photographic slide is never absolutely clean (there are always surface
deposits/dust, scratches etc), is there a tool that we can use to select
only the fungal hyphae of the emulsion surface?
Best
Themis
Στις Τρί 2 Ιουν 2026 στις 10:48 π.μ., ο/η Gluender <[email protected]>
έγραψε:
Greetings Moraitou Themis!
Without seeing typical images in their original non-lossy file-format
(no JPGs, no screen-shots) it is near to impossible to help.
"What would be the best approach to improve the separation of hyphae from
the background before thresholding?"
Frankly speaking:
The best pre-processing is no pre-processing but better images.
You may try to improve image acquisition by using color lighting for
better contrast. Phase contrast may also be of some help. Avoid
"structures or artifacts are present in the image", etc.
Best
Herbie
:::::::::::::::::::::::::::::::::::::::::::::
Am 02.06.26 um 11:29 schrieb Moraitou Themis:
Dear all,
I am interested in quantifying fungal hyphae growth on the surface of
photographic color slides using images taken with a Dino-Lite microscope.
The basic workflow that I follow in ImageJ roughly includes:
1. Convert the image to 8-bit grayscale.
2. Apply Subtract Background.
3. Use automatic thresholding (Otsu and Li seem to give the best results
so
far).
However, I encounter two main issues:
- The background is not uniform, and some structures or artifacts are
present in the image. As a result, background subtraction is often not
sufficient to isolate the hyphae.
- In some regions, the contrast between the hyphae and the background is
too low, so the threshold does not detect all hyphae consistently.
What would be the best approach to improve the separation of hyphae from
the background before thresholding? Are there specific preprocessing
steps,
filters, color-space transformations, or segmentation methods in
ImageJ/Fiji that could help achieve more reliable detection and
quantification?
Any suggestions or examples of similar workflows would be greatly
appreciated.
Thank you!
--
ImageJ mailing list: http://imagej.nih.gov/ij/list.html
--
ImageJ mailing list: http://imagej.nih.gov/ij/list.html
--
ImageJ mailing list: http://imagej.nih.gov/ij/list.html