Does anyone know of a company that would come in and do a network survey and 
see if there are any issues on our network concerning DNS, DHCP or any other 
mis-configured network programs.  Or if you know of a program that will help me 
with finding a source to my problem.

Mitch Mueller
Network Administrator    
 Emmetsburg Community Schools 
 Emmetsburg, Ia 50536 
mmuel...@emmetsburg.k12.ia.us
 P: (712)852-2966 
C: (712)298-0596 

----------------------------------------
From: "Mitch Mueller" <mmuel...@emmetsburg.k12.ia.us>
Sent: Friday, April 03, 2009 1:52 PM
To: info-tech@aea8.k12.ia.us
Subject: RE: [info-tech]help before i got completely insane 

When I try to set the RTS Threshold value i get an error saying The RTS 
THreshold value must be between 128 and 1540.  Also what would be the best 
channel to have them set at.

Mitch Mueller
Network Administrator    
 Emmetsburg Community Schools 
 Emmetsburg, Ia 50536 
mmuel...@emmetsburg.k12.ia.us
 P: (712)852-2966 
C: (712)298-0596 

----------------------------------------
From: "Frerichs, Chad" <cfreri...@okoboji.k12.ia.us>
Sent: Friday, April 03, 2009 12:46 PM
To: info-tech@aea8.k12.ia.us
Subject: RE: [info-tech]help before i got completely insane 

Are these N-draft cards? If so, we had an issue with those dealing with 
fragmentation/RTS thresholds. We had some old b cards that did not like large 
Frag/RTS thresholds so we had them set low. The N-Draft cards do not like them 
that low and exhibit behavior similar to what you are describing. So, to fix it 
we increased the Fragmentation threshold to 2048 and the RTS threshold to 2049 
and now all is well with the N-draft cards. However, the old b cards no longer 
function, which is mostly ok for us since we no longer use those devices except 
for 1 old palm pilot to program the door locks.

Thanks,

Chad Frerichs 
Director of Technology 
Okoboji Community Schools 
Milford, IA 51351 

________________________________

From: Murray Gafkjen [mailto:mgafk...@clay-everly.k12.ia.us]
Sent: Fri 4/3/2009 12:35 PM
To: info-tech@aea8.k12.ia.us
Subject: RE: [info-tech]help before i got completely insane

I agree with Sarah, make sure it is using windows wireless, third party drivers 
can cause problems.

Murray Gafkjen

From: info-tech-ow...@aea8.k12.ia.us [mailto:info-tech-ow...@aea8.k12.ia.us] On 
Behalf Of Sarah Freking
Sent: Friday, April 03, 2009 12:19 PM
To: info-tech@aea8.k12.ia.us
Subject: Re: [info-tech]help before i got completely insane

Is there wireless software on them, like Belkin (?), or something that is 
taking control of the wireless instead of the Windows administration of the 
wireless? We ran into that here. All I did was either remove or disable that 
software, and then Windows took over control of the wireless, and I had no more 
problems.

Sarah

Sarah M. Freking, District Technology Director

Storm Lake Community School District

Storm Lake, IA 50588

Phone: 712-732-8100 Fax: 712-732-8101

I see, I forget. I hear, I remember. I do, I understand.--Chinese Proverbs

info-tech@aea8.k12.ia.us writes:

I need help from anyone that can help me.  We recently bought a mobile lab cart 
with 30 hp laptops and have nothing but problems with them.  They came loaded 
with Vista Business and have plenty of RAM and processor speed to do what we 
need.  Just never have any luck with printing to the printer on the cart, 
accessing the internet, loading up students personal drives and the mapped 
drives.  I will log in as administrator, fix the wireless card and than log off 
and hand it to a student and then it will lose the connection.  I log back on 
as administrator and will have to repair the wireless again.  Anyone out there 
have some suggestions on what to try or can tell me who has no issues with 
wireless that i could come visit them before i decide to start throwing these 
laptops and not joking about them.  

PLEASE HELP ME BEFORE I GO NUTS!!!!!!!!

Mitch Mueller

Network Administrator    

Emmetsburg Community Schools

Emmetsburg, Ia 50536

mmuel...@emmetsburg.k12.ia.us  

P: (712)852-2966

C: (712)298-0596


Reply via email to