The pipe joiner maximum compressed BPP must be limited based on the pipe
joiner memory size and BW, do that for all DP outputs by adjusting the
max compressed BPP value already in
intel_dp_compute_config_link_bpp_limits() (which is used by all output
types).

This way the BPP doesn't need to be adjusted in
dsc_compute_compressed_bpp() (called for DP-SST after the above limits
were computed already), so remove the adjustment from there.

Signed-off-by: Imre Deak <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c 
b/drivers/gpu/drm/i915/display/intel_dp.c
index 55be648283b19..def1f869febc2 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2245,19 +2245,12 @@ static int dsc_compute_compressed_bpp(struct intel_dp 
*intel_dp,
 {
        struct intel_display *display = to_intel_display(intel_dp);
        const struct intel_connector *connector = 
to_intel_connector(conn_state->connector);
-       const struct drm_display_mode *adjusted_mode = 
&pipe_config->hw.adjusted_mode;
        int min_bpp_x16, max_bpp_x16, bpp_step_x16;
-       int dsc_joiner_max_bpp;
-       int num_joined_pipes = intel_crtc_num_joined_pipes(pipe_config);
        int link_bpp_x16;
        int bpp_x16;
        int ret;
 
-       dsc_joiner_max_bpp = get_max_compressed_bpp_with_joiner(display, 
adjusted_mode->crtc_clock,
-                                                               
adjusted_mode->hdisplay,
-                                                               
num_joined_pipes);
-       max_bpp_x16 = min(fxp_q4_from_int(dsc_joiner_max_bpp), 
limits->link.max_bpp_x16);
-
+       max_bpp_x16 = limits->link.max_bpp_x16;
        bpp_step_x16 = intel_dp_dsc_bpp_step_x16(connector);
 
        /* Compressed BPP should be less than the Input DSC bpp */
@@ -2613,6 +2606,7 @@ intel_dp_compute_config_link_bpp_limits(struct intel_dp 
*intel_dp,
                int dsc_src_min_bpp, dsc_sink_min_bpp, dsc_min_bpp;
                int dsc_src_max_bpp, dsc_sink_max_bpp, dsc_max_bpp;
                int throughput_max_bpp_x16;
+               int joiner_max_bpp;
 
                dsc_src_min_bpp = intel_dp_dsc_min_src_compressed_bpp();
                dsc_sink_min_bpp = 
intel_dp_dsc_sink_min_compressed_bpp(crtc_state);
@@ -2620,11 +2614,17 @@ intel_dp_compute_config_link_bpp_limits(struct intel_dp 
*intel_dp,
                limits->link.min_bpp_x16 = fxp_q4_from_int(dsc_min_bpp);
 
                dsc_src_max_bpp = dsc_src_max_compressed_bpp(intel_dp);
+               joiner_max_bpp =
+                       get_max_compressed_bpp_with_joiner(display,
+                                                          
adjusted_mode->crtc_clock,
+                                                          
adjusted_mode->hdisplay,
+                                                          
intel_crtc_num_joined_pipes(crtc_state));
                dsc_sink_max_bpp = 
intel_dp_dsc_sink_max_compressed_bpp(connector,
                                                                        
crtc_state,
                                                                        
limits->pipe.max_bpp / 3);
                dsc_max_bpp = dsc_sink_max_bpp ?
                              min(dsc_sink_max_bpp, dsc_src_max_bpp) : 
dsc_src_max_bpp;
+               dsc_max_bpp = min(dsc_max_bpp, joiner_max_bpp);
 
                max_link_bpp_x16 = min(max_link_bpp_x16, 
fxp_q4_from_int(dsc_max_bpp));
 
-- 
2.49.1

Reply via email to