Well it's been a while, since we've had and outage (knock on wood) but I think that probe will send you a notification when the unit switches to battery.
Vin Latus -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Don Goodhue Sent: Wednesday, September 19, 2007 9:00 AM To: [email protected] Subject: [IM-Talk] APC UPS AP961x probe Notifier I use the APC AP961x probe on all our UPS units across the WAN. Is there a way to have the probe trigger a notifier if the domestic power is cut? The probe monitors input voltage and battery life but I am looking for something that will page me when the power goes out so we have time to react before the UPS battery dies. Don Goodhue Information Systems Officer Union Bank ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] Confidentiality Notice: This communication is for its intended recipient only, and may contain information that is privileged and confidential. If you are not the intended recipient or the employee or agent responsible for delivering this communication to the intended recipient, you are hereby notified that any unauthorized use, dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by contacting the sender, and destroy or delete any electronic or hard copy you may have. Thank you. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
