I like that idea. If you have some quick instructions to do this I would certainly appreciate it.
Don Goodhue Information Systems Officer Union Bank -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Christopher L. Sweeney Sent: Wednesday, September 19, 2007 10:03 AM To: InterMapper Discussion Subject: RE: [IM-Talk] APC UPS AP961x probe Notifier At 9:47 AM -0400 9/19/07, Don Goodhue wrote: >I guess I was trying to avoid getting notified for every alarm such as >spikes, sags, packet loss, etc. and just wanted to focus on the lack of >input power. I know, I know, I'm getting too picky now. I think I will >set the notifier for alarms as you suggested and just see how it goes... > You could modify the probe to cause "on battery" to be critical, rather than alarm, then set the notifier for critical, instead. Please let me know if you need instructions for changing the probe. -- Christopher -- ================================================ Christopher L. Sweeney Dartware, LLC http://www.dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
