Wouldn't that require duplex mismatch? If I hard set both sides of the connection to half duplex, there will be no drops. I think the original question needs clarification... Do you want to detect duplex state or duplex mismatch events? In case of mismatch, there will be CRC errors. __________________________________________________________ Andrey Gordon | Integrity Interactive | Network Engineer | +1.781.398.3518
> From: Brian Gannon <gann...@rgmadvisors.com> > Reply-To: InterMapper Discussion <InterMapper-Talk@list.dartware.com> > Date: Tue, 24 Mar 2009 10:50:17 -0500 > To: InterMapper Discussion <InterMapper-Talk@list.dartware.com> > Subject: Re: [IM-Talk] Half duplex and 10half > > Probably the best way for it to detect the half duplex links is packet > drops. > The switch should go yellow or red if CRC errors and packet drops are > detected on that circuit. > > B > > > On Mar 24, 2009, at 10:31 AM, Quezada, Pedro wrote: > >> >> >> Is there any way intermapper can detect half duplex connections ... >> ____________________________________________________________________ >> List archives: >> http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ >> To unsubscribe: send email to: intermapper-talk-...@list.dartware.com >> > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: intermapper-talk-...@list.dartware.com > ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: intermapper-talk-...@list.dartware.com
