I understand.
My history tells me that what's told by the console/webinterface is
not always what's told via SNMP.. it can be buggy..
We have some routers (also Cisco) that does not report the right speed
on the DSL interfaces via SNMP...
We also have some DSL lines, (actually all of them) where the router
only seems to report the lowest speed, so a 20M down/2M up reports in
IM as a 2Mbit line... and we have to set it manually.. :-(
Best,
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
Email: [email protected]
AIM: Marook
Phone: +45 30787715
On 26/03/2009, at 08.08, Kevin Wigle wrote:
yes, Dartware has told me this before. I just don't think companies
like
Cisco and HP are going to agree that their SNMP mibs are wrong.
I am the only person who changes maps, and I have only just recently
used
the editor to set a link speed/duplex that I didn't agree with. I
have
never clicked on the defaults button (or noticed that it is there)
so I'll
look at that.
IM may be just repeating what it thinks the switch says in SNMP but
when I'm
on the switch console it tells me something else.
Kevin
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Jakob
Peterhänsel
Sent: March-25-09 5:07 AM
To: InterMapper Discussion
Subject: Re: [IM-Talk] Half duplex and 10half
But what IM says, is what the switch MIB reports via SNMP.. unless
someone has manually changed that link on your map.
Try clicking the link speed to get the link speed editor open, and
click the Defaults button - then you get what the switch in reporting
via SNMP!
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
Email: [email protected]
AIM: Marook
Phone: +45 30787715
On 25/03/2009, at 05.25, Kevin Wigle wrote:
I have an issue with duplex detection with Intermapper.
I can probably get several screen captures of where IM says the
interface is
at 100FD but the switch says that the interface is at 100 half.
I tend to believe the switch when this happens........
Kevin
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
