On 6/26/2009 11:52 PM, Adams, Walter CTR CNIC HQ, N61 wrote:
I am adding member probes to a group, these member probes are targeted
at a specific interface of a device, an unnumbered interface at that.
So the relevant info for that probe is interface specific, one of the
parameters that is set in the interface and passed to this custom SNMP
probe is the index of that interface.
Actually ideally it would be great if there was a standard way within an
SNMP probe to pass back value that could be used for the label the
member probe that would be different for each instance of the probe.
Again ideally this would need to be a variable value that could be set
based upon information returned from an OID or that could be set based
upon a parameter configured at the time you set the probe.
I hope this makes sense.
Hi Walter,
Yes, it does make sense. I'll create an enhancement request for you.
--
Best regards,
Janice Losgar
Dartware, LLC
603)643-9600 x114
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
