Kalau untuk BJC2100SP :
BJC-2100 Printer
Error Codes
The BJC-2100 does not beep or have any LED's to indicate errors. All errors are
reported via the computer with error messages.
Error Condition
Error Indication
on Computer
Error
Code
Possible Solution
Paper Feed
The Printer is out of paper
Add Paper
Paper Jam
A paper jam has occurred
Remove any paper jammed
Cover is open
The printer's front cover is open
Close the front panel
No cartridge
BJ Cartridge error occurred
Install the BJ cartridge properly and close the printers front cover.
Head Mismatch
An incorrect cartridge was installed in the printer.
Insure the scanner IS cartridge is installed when scanning or the BJ
Cartridge is installed when printing
EEPROM
An error that possibly requires a service call has occurred
6800
Try unplugging the printer for 30 seconds, if not requires a service.
Home Position
An error that possibly requires a service call has occurred
5000
Make sure no obstructions are blocking the cartridge movement, if not
needs service.
Carriage Error
An error that possibly requires a service call has occurred
5100
Try unplugging the printer for 30 seconds, if not requires a service.
Temperature Sensor
An error that possibly requires a service call has occurred
5400
Try unplugging the printer for 30 seconds, if not requires a service.
No Cartridge Error
An error that possibly requires a service call has occurred
5600
Try reinstalling Cartridge or replacing the cartridge
Waste Full
An error that possibly requires a service call has occurred
None
Needs Service
Cleaning Error
An error that possibly requires a service call has occurred
5C00
Make sure no obstructions are blocking the cartridge movement, if not
needs service.
Scanner IS-22
An error that possibly requires a service call has occurred
5210
Waste Error Reset
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Close Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data.
<!--[if !supportEmptyParas]--><!--[endif]-->
Salam.
----- Original Message -----
From: jmz
To: ITCENTER@yahoogroups.com
Sent: Friday, November 30, 2007 11:06 PM
Subject: Re: [ITCENTER] Canon IP1000 Error
Henkie Basuki Djayapranata wrote:
> Biasanya dikarenakan pad pengumpul sisa tinta sudah penuh atau dijadwalkan
sudah penuh.
Dimana letak pad sisa tintanya Pak? apakah yg di sebelah kanan
tempat offsheetnya head?
Klo saya buka cover utk ganti catridge, head printernya tdk
mau ke tengah, jd susah juga utk melihatnya.
> Coba periksa. Bersihkan dan setelah itu, coba cari cara me resetnya untuk
printer dengan merek dan model itu di www.fixyourownprinter.com.
> Kalau untuk BJC2100SP, saya sudah punya caranya.
boleh tau? moga aja bisa.
--
Jamal
[Non-text portions of this message have been removed]
--
www.itcenter.or.id - Komunitas Teknologi Informasi Indonesia
Gabung, Keluar, Mode Kirim : [EMAIL PROTECTED]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ITCENTER/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ITCENTER/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
