Hello everyone,
I have recently upgraded my system (FC3, PVR250) from ivtv version 0.2.0 to
0.4.3 and seem to have broken what was previously running flawlessly. When I
attempt to capture video it will run for a period of time, then ivtv will
stop with an encoder error. The length of time that it takes to hit the
error can be anywhere from a few minutes to several hours. Once it has
received an error, it will not capture video again until I reload ivtv
(fails sometimes) or reboot. Has anyone else had a similar failure with
0.4.3 or have any pointers for me to try out while troubleshooting this. I
should also note that I have a PVR-150 in another similar system (both built
with the latest offerings from ATrpms) and it is working perfectly.
Here are a couple of snippets of my logs showing my ivtv configuration and
the errors happening. I'd be happy to supply any other data needed to track
down this issue.
Linux video capture interface: v1.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.3 (tagged release) loading
ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (cx23415 based)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) ->
IRQ 10
tveeprom: ivtv version
tveeprom: Hauppauge: model = 48432, rev = I110, serial# = 6517044
tveeprom: tuner = Philips FI1236 MK2 (idx = 10, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP4448 (type = 1b)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv):
chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 0-0021: ivtv driver
saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
msp3400 0-0040: ivtv driver
msp3400 0-0040: chip=MSP4448G-A2 +nicam +simple +simpler +radio mode=simpler
ivtv0: i2c attach to card #0 ok [client=MSP4448G-A2, addr=40]
msp3400 0-0040: msp34xxg daemon started
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by ivtv
i2c driver #0
ivtv0: Initialized WinTV PVR 250, card #0
ivtv: ==================== END INIT IVTV ====================
.....
ivtv0 warning: Failed api call 0x00000082 with result 0xfffffff0
ivtv0 warning: ENC: Failed stopping capture -16
ivtv0 warning: Failed api call 0x00000082 with result 0xfffffff0
ivtv0 warning: ENC: Failed stopping capture -16
ivtv0 warning: Failed api call 0x000000d5 with result 0xfffffff0
ivtv0 warning: ENC: Failed to stop VIMevent notification -16
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000c8 with result 0xfffffff0
ivtv0 warning: init error 21. Code -16
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000b7 with result 0xfffffff0
ivtv0 warning: Failed api call 0x000000d5 with result 0xfffffff0
ivtv0 warning: Failed api call 0x00000081 with result 0xfffffff0
ivtv0 warning: Error starting capture!
ivtv0 warning: VBI capture start failed
.....
[root at mythbe1 mythtv]# cat /etc/modprobe.conf
alias eth0 3c59x
alias snd-card-0 snd-emu10k1
options snd-card-0 index=0
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-emu10k1
alias usb-controller uhci-hcd
# ivtv modules setup
alias char-major-81 ivtv
alias char-major-81-0 ivtv
.....
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
