|
Hans, FC5 latest kernel (2.6.17-1.2139_FC5smp) on monday 26th of june 2006 round 20:31 CEST. - Compiling OK. - loading ivtv OK. - loading ivtv_fb OK. The only problem I have is with lirc. I updated lirc with cvs recompiled and started it (modprobe lirc_i2c) and the only entry in my log is "lirc_dev: IR Remote Control driver registered, at major 61". Normally it would show: lirc_dev: IR Remote Control driver registered, at major 61 lirc_i2c: no version for "lirc_unregister_plugin" found: kernel tainted. lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150)) lirc_dev: lirc_register_plugin: sample_rate: 10 lirc_i2c: chip found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 I do not know if this is a lirc problem or ivtv. Regards, Michel. dmesg log for ivtv: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (development snapshot compiled on ma 26 jun 2006 20:09:28 CEST) loading ivtv: Linux version: 2.6.17-1.2139_FC5smp SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 217 tveeprom 1-0050: Hauppauge model 26059, rev C155, serial# 7583011 tveeprom 1-0050: tuner model is Philips FQ1216ME MK3 (idx 55, type 38) tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 1-0050: audio processor is CX25843 (idx 37) tveeprom 1-0050: decoder processor is CX25843 (idx 30) tveeprom 1-0050: has no radio, has IR remote tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 225 tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 48134, rev I121, serial# 6182877 tveeprom 2-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 2-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 2-0050: audio processor is MSP4418 (idx 25) tveeprom 2-0050: decoder processor is SAA7115 (idx 19) tveeprom 2-0050: has radio, has IR remote saa7115 2-0021: saa7115 found @ 0x42 (ivtv i2c driver #1) saa7127 2-0044: saa7127 found @ 0x88 (ivtv i2c driver #1) msp3400 2-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #1) msp3400 2-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect and autoselect ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02050032 ivtv1: Decoder revision: 0x02020023 ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv1: Create encoder radio stream ivtv1: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total) ivtv1: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total) ivtv1: Create decoder VOUT stream ivtv1: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total) ivtv1: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) tuner 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) ivtv1: Initialized Hauppauge WinTV PVR-350, card #1 ivtv: ==================== END INIT IVTV ==================== |
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
