Hmm...
$ diff lirc/drivers/lirc_i2c/lirc_i2c.c lirc\
062106/drivers/lirc_i2c/lirc_i2c.c
< /* $Id: lirc_i2c.c,v 1.38 2006/06/26 23:21:34 lirc Exp $ */
> /* $Id: lirc_i2c.c,v 1.37 2006/05/20 04:38:58 lirc Exp $ */
< #ifdef I2C_HW_B_CX2341X
< if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848) ||
< adap->id == (I2C_ALGO_BIT | I2C_HW_B_CX2341X))
< #else
< if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848))
< #endif
< {
---
> if (adap->id == (I2C_ALGO_BIT | I2C_HW_B_BT848)) {
Seems to have added some checking for i2c definitions for I2C_HW_B_CX2341X
(kernel 2.6.17+) and I2C_HW_B_BT848. Certainly looks like some updates in
the right areas, but proof will be in the pudding!
Will try it tonight....
----- Original Message -----
From: "Michel Verbraak" <[EMAIL PROTECTED]>
To: "Discussion list for development of the IVTV driver"
<[email protected]>
Sent: Tuesday, June 27, 2006 8:39 AM
Subject: Re: [ivtv-devel] Please test: 0.7.0 prerelease (LIRC problem)
> LIRC cvs version of today, tuesday 27th of june 2006 14:00 CEST seems to
> work allright. They updated the lirc_i2c.c file.
>
> Regards,
>
> Michel
> http://www.verbraak.org/IvTv
>
> Michel Verbraak schreef:
>> Hans Verkuil schreef:
>>> On Monday 26 June 2006 22:37, Michel Verbraak wrote:
>>>
>>>> Simon, Hans,
>>>>
>>>> I have a PVR-150 PAL and a PVR-350 PAL.
>>>>
>>>> With version 0.6.3 of ivtv and kernel 2.6.16 and LIRC cvs i had both
>>>> ir receivers working.
>>>>
>>>> Currently none. Ik wil try some debugging tomorrow, don't have time
>>>> now. Looks like the cards are not responding to the i2c probing of
>>>> lirc.
>>>>
>>>> Regards,
>>>>
>>>> Michel.
>>>>
>>>
>>> It's likely because lirc is checking for adapter ID I2C_HW_B_BT848. But
>>> in 2.6.17 it's been changed to the (correct) I2C_HW_B_CX2341X. But what
>>> I really don't understand is why lirc doesn't check for the
>>> I2C_ADAP_CLASS_TV_ANALOG class adapters. That's much more generic for
>>> 2.6 kernels.
>>>
>>> Furthermore, I'm always using the ir-kbd-i2c module. I can then run
>>> lircd pointing it to the /dev/input/eventX device.
>>>
>>>
>> did a modprobe ir-kbd-i2c and the following is in the log:
>> input: i2c IR (Hauppauge) as /class/input/input2
>> ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-2/2-0018/ir0 [ivtv i2c
>> driver #1]
>>
>> And I do get one event device:
>> crw------- 1 root root 13, 66 jun 27 07:26 event2
>>
>> Only one of the two cards is seen by ir-kbd-i2c. And from the driver
>> number [ivtv i2c driver #1] it is my PVR-350 and not the PVR-150.
>> Any suggestions!? I will have a look at the lirc part also.
>>> Hans
>>>
>>> _______________________________________________
>>> ivtv-devel mailing list
>>> [email protected]
>>> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> ivtv-devel mailing list
>> [email protected]
>> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
>
>
--------------------------------------------------------------------------------
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
