On Monday 26 June 2006 21:23, Simon Baxter wrote:
> > The only problem I have is with lirc. I updated lirc with cvs
> > recompiled and started it (modprobe lirc_i2c) and the only entry in
> > my log is "lirc_dev: IR Remote Control driver registered, at major
> > 61". Normally it would show:
> > lirc_dev: IR Remote Control driver registered, at major 61
> > lirc_i2c: no version for "lirc_unregister_plugin" found: kernel
> > tainted. lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150))
> > lirc_dev: lirc_register_plugin: sample_rate: 10
> > lirc_i2c: chip found @ 0x18 (Hauppauge IR)
> > lirc_dev: lirc_register_plugin: sample_rate: 10
> > I do not know if this is a lirc problem or ivtv.
> >
> > Regards,
> >
> > Michel.
>
> I've had similar results, but with ALL versions of ivtv with my
> PVR-150. I've not had any sign of life from the IR EVER on this
> card....

<paranoia mode on>
You DO have a IR connector, do you? I mean, I'm not sure if the tveeprom 
can be trusted 100%.
<paranoia mode off>

        Hans

>
> I get:
> <snip>
> tveeprom 1-0050: has no radio, has IR remote
>
> <snip>
> lirc_dev: IR Remote Control driver registered, at major 61
> lirc_pvr150: no version for "lirc_unregister_plugin" found: kernel
> tainted. lirc_pvr150: probe 0x70 @ ivtv i2c driver #0: no
> lirc_pvr150: probe 0x71 @ ivtv i2c driver #0: no
> lirc_pvr150: ivtv i2c driver #0: no devices found
>
> lirc_dev ([-1]): open called
> lirc_dev ([-1]): open result = -ENODEV
> <snip>
>
> [EMAIL PROTECTED] ~]# tail /var/log/lircd
>  media.nzbaxters lircd: could not open /dev/lirc0
>  media.nzbaxters lircd: default_init(): No such device
>  media.nzbaxters lircd: caught signal
>  media.nzbaxters lircd: lircd(hauppauge_pvr150) ready
>  media.nzbaxters lircd: caught signal
>  media.nzbaxters lircd: lircd(hauppauge_pvr150) ready
>  media.nzbaxters lircd: accepted new client on /dev/lircd
>  media.nzbaxters lircd: could not open /dev/lirc0
>  media.nzbaxters lircd: default_init(): No such device
>  media.nzbaxters lircd: caught signal
>
>
> I'm using a 1045 (NTSC) version of the card - what model is yours? 
> What LIRC version do you use (rpm? source version?)
>
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to