- Ian
On 11/15/06, Han Holl <[EMAIL PROTECTED]> wrote:
Hello,
To begin with, I have a _working_ system: Linux version: 2.6.11-1.27_FC3 686
REGPARM 4KSTACKS gcc-3.4, with ivtv driver: version 0.3.2 (q). I guess that
means that nothing is wrong with my hardware, cabling and so on. (No newer
version than 0.3.2q ever worked for me).
But because the setup is so old, and because I want to upgrade mythtv as well,
every now and then I try to get ivtv up and running on a fresh Fedora system,
and until now it keeps failing.
I'v tried with kernel 2.6.18-1.2849.fc6 (and the slightly older 2798 as well),
with ivtv-0.8.0 as well as a svn version and a trunk tgz.
The result is always the same: tuner works fine (all 32 channels, with
sometimes a hint of not lip-syncness), but on the s-video channel I don't
have any colour. I've tested with 'mplayer /dev/video0' and
with 'cat /dev/video0 >file; mplayer file', so there is no mythtv or anything
in the way.
I've dug through the mailing lists and the curious thing is that I seem to be
the only one. If there's anything else I can try (parameters or debugging
levels), I'm glad to do so.
Here's the ouput from the loading modules: (I removed non-ivtv related lines,
hope I didn't remove too much).
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.0 (tagged release) loading
ivtv: Linux version: 2.6.18-1.2849.fc6 SMP mod_unload 686 REGPARM 4KSTACKS
gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tveeprom 2-0050: Hauppauge model 26559, rev C260, serial# 7626017
tveeprom 2-0050: tuner model is LG S001D MK3 (idx 60, type 38)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom
0x74)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio, has no IR remote
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
Cheers
Han Holl
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
