On Wednesday 15 November 2006 22:10, Hans Verkuil wrote: > > 1) which input do you select in ivtv-0.8.0 for S-Video? v4l2-ctl -i 1 Video input set to 1 (S-Video 1) > 2) which input do you select in ivtv-0.3.2q for S-Video? I'm not certain, because I just use mythtv. If it's important I can find out. > 3) when capturing from S-Video with ivtv-0.8.0 run v4l2-ctl --log-status > and post the output from that command. Status Log:
ivtv0: ================= START STATUS CARD #0 ================= tveeprom 2-0050: Hauppauge model 26559, rev C260, serial# 7626017 tveeprom 2-0050: tuner model is LG S001D MK3 (idx 60, type 38) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote tda9887 2-0043: Data bytes: b=0x14 c=0x6e e=0x49 tuner 2-0061: Tuner mode: analog TV tuner 2-0061: Frequency: 400.00 MHz tuner 2-0061: Standard: 0x000000ff cx25840 2-0044: Video signal: present cx25840 2-0044: Detected format: PAL-BDGHI cx25840 2-0044: Specified standard: PAL-BDGHI cx25840 2-0044: Specified video input: S-Video (Luma In1, Chroma In5) cx25840 2-0044: Specified audioclock freq: 48000 Hz cx25840 2-0044: Detected audio mode: forced mode cx25840 2-0044: Detected audio standard: no detected audio standard cx25840 2-0044: Audio muted: no cx25840 2-0044: Audio microcontroller: stopped cx25840 2-0044: Configured audio standard: automatic detection cx25840 2-0044: Configured audio system: automatic standard and mode detection cx25840 2-0044: Specified audio input: External cx25840 2-0044: Preferred audio mode: stereo cx25840 2-0044: Selected 65 MHz format: autodetect cx25840 2-0044: Selected 45 MHz format: chroma wm8775 2-001b: Input: 2 ivtv0: Stream: MPEG-2 Program Stream ivtv0: Video: 720x576, 25 fps ivtv0: Video: MPEG-2, 4x3, Variable Bitrate, 6000000, Peak 8000000 ivtv0: Video: GOP Size 12, 2 B-Frames, GOP Closure, No 3:2 Pulldown ivtv0: Audio: 48 kHz, Layer II, 224 kbps, Stereo, No Emphasis, No CRC ivtv0: Spatial Filter: Manual, Luma 1D Horizontal, Chroma 1D Horizontal, 0 ivtv0: Temporal Filter: Manual, 0 ivtv0: Median Filter: Off, Luma [0, 255], Chroma [0, 255] ivtv0: ================== END STATUS CARD #0 ================== > > That should be enough to find the problem. > I sure hope so. Thanks for the incredibly fast reaction. Cheers, Han Holl _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
