Sometimes it takes awhile for me to wake up :-)
You are using cx25840, wm8775 and tuner modules from ivtv-0.3 instead of
those from the 2.6.18 kernel. You can see that based on the 'ivtv i2c
driver' lines in the log.
Remove those old modules and try again. It should work now.
Hans
On Wednesday 15 November 2006 21:54, Han Holl wrote:
> Hello,
>
> To begin with, I have a _working_ system: Linux version:
> 2.6.11-1.27_FC3 686 REGPARM 4KSTACKS gcc-3.4, with ivtv driver:
> version 0.3.2 (q). I guess that means that nothing is wrong with my
> hardware, cabling and so on. (No newer version than 0.3.2q ever
> worked for me).
>
> But because the setup is so old, and because I want to upgrade mythtv
> as well, every now and then I try to get ivtv up and running on a
> fresh Fedora system, and until now it keeps failing.
>
> I'v tried with kernel 2.6.18-1.2849.fc6 (and the slightly older 2798
> as well), with ivtv-0.8.0 as well as a svn version and a trunk tgz.
> The result is always the same: tuner works fine (all 32 channels,
> with sometimes a hint of not lip-syncness), but on the s-video
> channel I don't have any colour. I've tested with 'mplayer
> /dev/video0' and
> with 'cat /dev/video0 >file; mplayer file', so there is no mythtv or
> anything in the way.
>
> I've dug through the mailing lists and the curious thing is that I
> seem to be the only one. If there's anything else I can try
> (parameters or debugging levels), I'm glad to do so.
>
> Here's the ouput from the loading modules: (I removed non-ivtv
> related lines, hope I didn't remove too much).
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.8.0 (tagged release) loading
> ivtv: Linux version: 2.6.18-1.2849.fc6 SMP mod_unload 686 REGPARM
> 4KSTACKS gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
> i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
> ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> tveeprom 2-0050: Hauppauge model 26559, rev C260, serial# 7626017
> tveeprom 2-0050: tuner model is LG S001D MK3 (idx 60, type 38)
> tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
> (eeprom 0x74)
> tveeprom 2-0050: audio processor is CX25843 (idx 37)
> tveeprom 2-0050: decoder processor is CX25843 (idx 30)
> tveeprom 2-0050: has radio, has no IR remote
> tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
> tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
> cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Registered device video0 for encoder MPEG
> ivtv0: Registered device video32 for encoder YUV
> ivtv0: Registered device vbi0 for encoder VBI
> ivtv0: Registered device video24 for encoder PCM audio
> ivtv0: Registered device radio0 for encoder radio
> tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
> ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> Cheers
>
> Han Holl
>
>
> _______________________________________________
> ivtv-devel mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-devel
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
