Hello List,

I am running an FC5 system.  I have been trying to use the ivtv modules to get 
my card working.  I am using the modules installed from atrpms.  I also tried 
using the cardtype=6 but that did not give me any joy either.

Here is the output from lspci -v and then INIT from the messages file:
LSPCI:
04:02.0 Multimedia video controller: Internext Compression Inc iTVC16 
(CX23416) MPEG-2 Encoder (rev 01)
         Subsystem: ATI Technologies Inc Unknown device fffb
         Flags: bus master, medium devsel, latency 64, IRQ 225
         Memory at d8000000 (32-bit, prefetchable) [size=64M]
         Capabilities: [44] Power Management version 2
INIT:
Oct  5 16:19:47 memetic kernel: ivtv:  ==================== START INIT IVTV 
====================
Oct  5 16:19:47 memetic kernel: ivtv:  version 0.7.0 (tagged release) loading
Oct  5 16:19:47 memetic kernel: ivtv:  Linux version: 2.6.17-1.2187_FC5smp SMP 
mod_unload 686 REGPARM 4KSTACKS gcc-4.1
Oct  5 16:19:47 memetic kernel: ivtv:  In case of problems please include the 
debug info between
Oct  5 16:19:47 memetic kernel: ivtv:  the START INIT IVTV and END INIT IVTV 
lines, along with
Oct  5 16:19:47 memetic kernel: ivtv:  any module options, when mailing the 
ivtv-users mailinglist.
Oct  5 16:19:47 memetic kernel: ivtv0: Unknown card: vendor/device: 4444/0016
Oct  5 16:19:47 memetic kernel: ivtv0:               subsystem vendor/device: 
1002/fffb
Oct  5 16:19:47 memetic kernel: ivtv0:               cx23416 based
Oct  5 16:19:47 memetic kernel: ivtv0: Defaulting to Hauppauge WinTV PVR-150 
card
Oct  5 16:19:47 memetic kernel: ivtv0: Please mail the vendor/device and 
subsystem vendor/device IDs and what kind of
Oct  5 16:19:48 memetic kernel: ivtv0: card you have to the ivtv-devel 
mailinglist (www.ivtvdriver.org)
Oct  5 16:19:48 memetic kernel: ivtv0: Prefix your subject line with [UNKNOWN 
CARD].
Oct  5 16:19:48 memetic kernel: ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 
(level, low) -> IRQ 225
Oct  5 16:19:48 memetic kernel: tveeprom 1-0050: Huh, no eeprom present 
(err=-121)?
Oct  5 16:19:48 memetic kernel: tveeprom 1-0050: Encountered bad packet header 
[80]. Corrupt or not a Hauppauge eeprom.
Oct  5 16:19:48 memetic kernel: ivtv0: No tuner detected, default to NTSC
Oct  5 16:19:48 memetic kernel: USB Universal Host Controller Interface driver 
v3.0
Oct  5 16:19:48 memetic kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 
(level, low) -> IRQ 233
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, 
assigned bus number 1
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.0: irq 233, io base 
0x0000ff80
Oct  5 16:19:48 memetic kernel: usb usb1: configuration #1 chosen from 1 choice
Oct  5 16:19:48 memetic kernel: hub 1-0:1.0: USB hub found
Oct  5 16:19:48 memetic kernel: hub 1-0:1.0: 2 ports detected
Oct  5 16:19:48 memetic kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 
(level, low) -> IRQ 50
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, 
assigned bus number 2
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.1: irq 50, io base 
0x0000ff60
Oct  5 16:19:48 memetic kernel: usb usb2: configuration #1 chosen from 1 choice
Oct  5 16:19:48 memetic kernel: hub 2-0:1.0: USB hub found
Oct  5 16:19:48 memetic kernel: hub 2-0:1.0: 2 ports detected
Oct  5 16:19:48 memetic kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 
(level, low) -> IRQ 225
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, 
assigned bus number 3
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.2: irq 225, io base 
0x0000ff40
Oct  5 16:19:48 memetic kernel: usb usb3: configuration #1 chosen from 1 choice
Oct  5 16:19:48 memetic kernel: hub 3-0:1.0: USB hub found
Oct  5 16:19:48 memetic kernel: hub 3-0:1.0: 2 ports detected
Oct  5 16:19:48 memetic kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 
(level, low) -> IRQ 58
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, 
assigned bus number 4
Oct  5 16:19:48 memetic kernel: uhci_hcd 0000:00:1d.3: irq 58, io base 
0x0000ff20
Oct  5 16:19:48 memetic kernel: usb usb4: configuration #1 chosen from 1 choice
Oct  5 16:19:48 memetic kernel: hub 4-0:1.0: USB hub found
Oct  5 16:19:48 memetic kernel: hub 4-0:1.0: 2 ports detected
Oct  5 16:19:48 memetic kernel: usb 2-1: new full speed USB device using 
uhci_hcd and address 2
Oct  5 16:19:48 memetic kernel: usb 2-1: configuration #1 chosen from 1 choice
Oct  5 16:19:48 memetic kernel: hub 2-1:1.0: USB hub found
Oct  5 16:19:48 memetic kernel: hub 2-1:1.0: 4 ports detected
Oct  5 16:19:48 memetic kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware 
(262144 bytes)
Oct  5 16:19:48 memetic kernel: ivtv0: Encoder revision: 0x02040024
Oct  5 16:19:48 memetic kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 
32768 buffers (4096KB total)
Oct  5 16:19:48 memetic kernel: ivtv0: Allocate DMA encoder YUV stream: 194 x 
10800 buffers (2048KB total)
Oct  5 16:19:48 memetic kernel: ivtv0: Allocate DMA encoder VBI stream: 120 x 
17472 buffers (2048KB total)
Oct  5 16:19:48 memetic kernel: ivtv0: Allocate DMA encoder PCM audio stream: 
455 x 4608 buffers (2048KB total)
Oct  5 16:19:48 memetic kernel: ivtv0: i2c hardware 0x00000001 not found for 
command 0xc008561c!
Oct  5 16:19:48 memetic kernel: ivtv0: i2c addr 0x44 not found for command 
0x4008646f!
Oct  5 16:19:48 memetic kernel: ivtv0: i2c hardware 0x00000020 not found for 
command 0x4008646d!
Oct  5 16:19:48 memetic kernel: ivtv0: i2c hardware 0x00000001 not found for 
command 0x4008646d!
Oct  5 16:19:48 memetic kernel: ivtv0: i2c hardware 0x00000001 not found for 
command 0xc008561c!
Oct  5 16:19:48 memetic last message repeated 2 times
Oct  5 16:19:48 memetic kernel: ivtv0: Initialized Hauppauge WinTV PVR-150, 
card #0
Oct  5 16:19:48 memetic kernel: ivtv:  ====================  END INIT IVTV 
====================

Ideas / Suggestions?

TIA
-- 
Jim Summers
School of Computer Science-University of Oklahoma
-------------------------------------------------

_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel

Reply via email to