(this is the second message attempt, the first apparently got lost in the process of signing up for the list)
Hello! I have a Sony Vaio PCV-RZ 32G multimedia tower, which comes with a capture card. I have installed MythTV, trying 2 different operating systems, but am unable to watch/record TV through the card. The card is Sony Branded, and says Made in Japan on the green plastic. I can see a Conexant chip that has the words CONEXANT MPEG II AV ENCODER CX23416-12 E345902.1 0311 TAIWAN Other relevant information is: # lspci | grep Encoder 0000:03:0a.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) # dmesg | grep ivtv ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.7.0 (tagged release) loading ivtv: Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Unknown card: vendor/device: 4444/0016 ivtv0: subsystem vendor/device: 104d/813d ivtv0: cx23416 based ivtv0: Defaulting to Hauppauge WinTV PVR-150 card ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and what kind of ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org) ivtv0: Prefix your subject line with [UNKNOWN CARD]. tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) ivtv0: No tuner detected, default to NTSC ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000020 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv0: i2c addr 0x44 not found for command 0xc0cc5605! ivtv0: i2c addr 0x44 not found for command 0xc0445624! ivtv0: i2c addr 0x44 not found for command 0xc0445624! ivtv0: i2c addr 0x44 not found for command 0xc0445624! ivtv0: i2c addr 0x44 not found for command 0xc0445624! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 not found for command 0xc008561c! It also appears someone else had a similar question, but the OP never followed up. www.mythtvtalk.com/forum/viewtopic.php?t=558&highlight=vaio thank you for you help and work developing the drivers stony
_______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
