Hi,
I own a Hauppauge WinTV PVR-150 card which is not automaticly recognized
by ivtv. However, the card is working fine, because of fallback to PVR150.
regards,
Guido Ackermann
here is the data for this Card:
# uname -a
Linux router2 2.6.18-4-686 #1 SMP Mon Mar 26 17:17:36 UTC 2007 i686
GNU/Linux
(Debian Etch)
# lspci
02:04.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc. Unknown device b7f3
Flags: bus master, medium devsel, latency 64, IRQ 185
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
# dmesg
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.0 (tagged release) loading
ivtv: Linux version: 2.6.18-4-686 SMP mod_unload 686 REGPARM gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Unknown card: vendor/device: 4444/0016
ivtv0: subsystem vendor/device: 0070/b7f3
ivtv0: cx23416 based
ivtv0: Defaulting to Hauppauge WinTV PVR-150 card
ivtv0: Please mail the vendor/device and subsystem vendor/device IDs and
what kind of
ivtv0: card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)
ivtv0: Prefix your subject line with [UNKNOWN CARD].
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
tveeprom 1-0050: Hauppauge model 26034, rev C197, serial# 7768051
tveeprom 1-0050: tuner model is TCL 2002MB_3H (idx 97, type 55)
tveeprom 1-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
tveeprom 1-0050: audio processor is CX25842 (idx 36)
tveeprom 1-0050: decoder processor is CX25842 (idx 29)
tveeprom 1-0050: has no radio, has IR remote
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: Encoder revision: 0x02050032
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
tuner 1-0061: type set to 55 (TCL 2002MB)
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
_______________________________________________
ivtv-devel mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-devel
