> Am Samstag, 16. Februar 2008 11:04:26 schrieb Andy Walls: > > Loading the cx18 with only file-op debugging turned on: > > > > # modprobe -r cx18 > > # modprobe cx18 debug=32 > > > > appears to keep MythTV happy on my machine with a minimum amount of > > extra messages showing up in dmesg.
> What MythTV version are you using? With a recent trunk I can't even select > the hvr 1600 anymore. I get a "failed to open" in the new cards dialogue. An old one: $ ls -agGh *bz2 -rw-rw-r-- 1 32M 2007-11-04 06:29 mythplugins-fixes-svn14795.tar.bz2 -rw-rw-r-- 1 25M 2007-11-04 06:28 myththemes-fixes-svn14795.tar.bz2 -rw-rw-r-- 1 23M 2007-11-04 06:27 mythtv-fixes-svn14795.tar.bz2 (Once I went through the pain of setting up MythTV from the source, I didn't want to do it again anytime soon.) I tell MythTV that the /dev/video1 device, that corresponds to the cx18 driver, is a PVR-150/PVR-500. I never had an HVR-1600 entry in mythtv-setup. :) And just to eliminate the obvious: Before doing a "modprobe -r cx18; modprobe cx18 debug=n" make sure the mythbackend doesn't have /dev/video* open for some reason: $ /sbin/fuser /dev/video* Also make sure that the cx18 module comes back with the same device nodes that you told mythtv-setup about, with the proper permissions. -Andy _______________________________________________ ivtv-devel mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-devel
