Cameron Booth wrote:
You have one of the new tuners that's not supported by the Linux kernel releases. If truly following Jarod's guide, you should have installed ivtv-0.1.10-pre2-ck100zz *and* the video4linux (v4l) snapshot (which contains an updated tuner module). You have ck100zz installed, but you do *not* have the updated tuner module that is present in the v4l snapshot. It seems that 0.1.10-48.3_pre2_ck100zz.rhfc2.at did not specify the v4l snapshot as a prerequisite for the ivtv drivers (old version of ck100zz), so v4l did not install on your system.I've got a new FC2 install, and I'm following "Jarrod's Guide" (http://www.wilsonet.com/mythtv) to install MythTV on it. Everything was going fine, according to his steps, until it got time to test for capture of video:
cat /dev/video0 > /tmp/video.mpg mplayer /tmp/video.mpg
I just get static in the mplayer window.....
I've tried opening up the ptune-ui.pl interface, and changing channels around, with mplayer /dev/video0 open, but I still get nothing.
Any suggestion greatly appreciated! I'm at a loss.... ... tveeprom: tuner = TCL 2002N (idx = 85, type = 50) ... ivtv: Setting Tuner 50 tuner: tuner type not set
The current version of ck100zz is somewhere around 52.something. Therefore, I suggest trying to figure out why your system is choosing the old version of ivtv. Search the archives for a thread "FC2 with PVR250 - No capture, only static" in which another user and Axel are trying to track down the reason why the old version is installing (same version you have, BTW). I'd help, but I'm not an FC user and don't know RPM... :)
Mike
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
ivtv-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
