Hans Verkuil wrote:
On Tuesday 16 August 2005 22:29, Mean wrote:
Hans Verkuil wrote:
I looked through the saa7127 (for SECAM that must be a saa7128/9) code and
I can't imagine that the TV-out works properly for SECAM. Can anyone
confirm that?
Hans
Works fine here (French Secam) with 3.x, drivers from ~2 weeks ago
HTH
Can you check if you have a saa7127 or saa7128/9 chip? Can you also output to
TV-out and then running 'ivtvctl -J' and mail me the output? Oh, and I'd also
like to see the dmesg output (the IVTV bits between the START IVTV and END
IVTV lines). I'm curious how it works.
Thanks!
Hans
Please tell me if you need something else
The ivtvclt was done with osd active, not while outputing
mpeg if that matters.
(I think the tvout is configured for PAL, but since it is through the scart
it does not matter )
Thanks
[EMAIL PROTECTED] log # /usr/local/bin/ivtvctl -J
ioctl: IVTV_IOC_G_SAA7127_REG
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
0000: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0020: 00 00 00 00 00 00 08 00 21 1d 77 41 00 bf 00 00
0030: 00 00 00 00 00 00 00 00 00 00 13 00 00 00 00 00
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0050: 00 00 00 00 00 00 00 00 00 00 3f 7d af 33 35 35
0060: 7a 02 2f cb 8a 09 2a 77 41 88 41 12 f9 00 a0 00
0070: 41 c3 00 3e b8 03 15 16 15 16 1a 01 c0 00 00 00
saa7115: Ignoring new-style parameters in presence of obsolete ones
saa7127: Unknown parameter `enable_output'
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.7 (b) loading
ivtv: Linux version: 2.6.8.1 K7 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom: Hauppauge: model = 48139, rev = J352, serial# = 6657257
tveeprom: tuner = Microtune 4049 FM5 (idx = 52, type = 45)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 =
0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode,
simpler (G)
no-thread mode
msp34xx: $Id$ compiled on: Aug 3 2005 19:16:26
ivtv: i2c attach [client=MSP3418W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
saa7127: starting probe on adapter ivtv i2c driver #0 (0x10005)
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
tda9885/6/7: chip found @ 0x86
ivtv: i2c attach [client=tda9887,ok]
ivtv: Failed to load module tveeprom
ivtv: Tuner Type 45, Tuner formats 0x00400e17, Radio: yes, Model
0x00a93552, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: Radio detected
ivtv: Failed to load module tuner
ivtv: Failed to load module saa7115
ivtv: Failed to load module saa7127
ivtv: Failed to load module msp3400
ivtv: Failed to load module tda9887
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device for encoder MPEG minor 0
ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
ivtv: Registered v4l2 device for encoder YUV minor 32
ivtv: Create DMA encoder YUV stream: 0 x 12960 buffers (0KB total)
ivtv: Registered v4l2 device for encoder VBI minor 224
ivtv: Create DMA encoder VBI stream: 0 x 12740 buffers (0KB total)
ivtv: Registered v4l2 device for encoder PCM audio minor 24
ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
ivtv: Registered v4l2 device for encoder radio minor 64
ivtv: Create encoder radio stream
ivtv: Registered v4l2 device for decoder MPEG minor 16
ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VBI minor 228
ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total)
ivtv: Registered v4l2 device for decoder VOUT minor 232
ivtv: Create decoder VOUT stream
ivtv: Registered v4l2 device for decoder YUV minor 48
ivtv: Create DMA decoder YUV stream: 0 x 51840 buffers (0KB total)
ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total)
ivtv: Setting Tuner 45
tuner: type set to 45 (Microtune 4049 FM5) by ivtv i2c driver #0
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 845, itv = 0xdc9d7560
ivtv: ivtv_enc_vbi_thread: pid = 846, itv = 0xdc9d7560
ivtv: ivtv_dec_thread: pid = 847, itv = 0xdc9d7560
ivtv: ivtv_dec_vbi_thread: pid = 848, itv = 0xdc9d7560
spurious 8259A interrupt: IRQ7.
tda9885/6/7: configure for: PAL-BG
tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: Switching standard to SECAM.
tda9885/6/7: configure for: SECAM-L
tda9885/6/7: writing: b=0xc4 c=0x10 e=0x0b
saa7115: decoder set norm SECAM
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
saa7115: decoder set size
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has
1704960 bytes.
ivtv-osd: screen coords: [0 0] -> [720 576]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xd5510000, mapped to 0xdd804000, size 1620k
ivtv-osd: mode is 720x576x32, linelength=2880
ivtv-osd: fb0: iTVC15 TV out frame buffer device
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
ivtv-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ivtv-devel
