How are you tuning the tuner?

Read through

http://www.ivtvdriver.org/index.php/Troubleshooting
and
http://www.ivtvdriver.org/index.php/Asking_for_help

and see if that helps.

Cheers,

Ross

On 11/7/05, Stéphane Zanoni <[EMAIL PROTECTED]> wrote:
> I've been able to get the tuner card to play the radio, but I can't seem to 
> get the video to display.  Here's some more information 'ivtvctl 
> --input-detect' and 'ivtv-detect'.  What can I do to find out what's causing 
> the card not to receive a video signal.
>
> Stéphane
>
>
> After running 'ivtv-detect':
>
>
> [EMAIL PROTECTED] bin]# ivtv-detect
> tuner: radio freq (0.00) out of range (65-108)
> tuner: radio freq (0.00) out of range (65-108)
> driver:   ivtv-0.4.0 (tagged release)
> card:     WinTV PVR 500 (unit #1), bus info 0000:02:08.0, ivtv card #0
> hardware: cx25840 tda9887 wm8775 tveeprom
>          /dev/video0: MPG encoding (links: /dev/video)
>          /dev/radio0: Radio        (links: /dev/radio)
>            /dev/vbi0: VBI encoding (links: /dev/vbi)
>         /dev/video24: PCM encoding
>         /dev/video32: YUV encoding
>
> driver:   ivtv-0.4.0 (tagged release)
> card:     WinTV PVR 500 (unit #2), bus info 0000:02:09.0, ivtv card #1
> hardware: cx25840 tda9887 wm8775 tveeprom
>          /dev/video1: MPG encoding
>            /dev/vbi1: VBI encoding
>         /dev/video25: PCM encoding
>         /dev/video33: YUV encoding
>
>
>
> After running 'ivtvctl --input-detect':
>
>
> [EMAIL PROTECTED] bin]# ivtvctl --input-detect
> check SAA7115 input signal
> ioctl: VIDEO_STATUS = Bad
>
> SAA7115 reg[STATUS#1 - 0x1E] = 00
>  Color Standard (D0-D1): BW/No color
>  White peak loop (D2): Not activated
>  Gain value for act.lum. (min) (D3): Not limited
>  Gain value for act.lum. (max) (D4): Not limited
>  WIPA-mode slow-time constant (D5): Not activated
>  Horizontal frequency (D6): Locked
>  Field length (D7): Non-standard
>
> SAA7115 reg[STATUS#2 - 0x1F] = 00
>  Ready for capture (D0): No
>  Macrovision 7.01 (D1): No
>  MV Colorstripe burst (D2): No
>  MV Colorstripe burst type 3 (D3): No
>  Input signal timebase (D4): Non-stable (VCR)
>  Field frequency (D5): 50Hz
>  H & V loops (D6): Locked
>  Interlace (D7): Not detected
>
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to