woopsie, dri got turned off, so i fixed that and the prebuffer thing went away.
however, my video in mythtv is still screwed up now, and there is no audio? On 1/3/06, John H. <[EMAIL PROTECTED]> wrote: > i compiled in the new kernel modules required > > mythtv has a REALLY bad display now, and quits after a few seconds > 2006-01-03 16:35:16.910 nVidiaVideoSync: VBlank ioctl did not work, > unimplemented in this driver? > 2006-01-03 16:35:16.910 DRMVideoSync: Could not open device > /dev/dri/card0, No such file or directory > 2006-01-03 16:35:16.981 Using audio as timebase > 2006-01-03 16:35:16.981 Video timing method: RTC > 2006-01-03 16:35:16.981 Refresh rate: 13328, frame interval: 33366 > 2006-01-03 16:35:16.981 waiting for prebuffer... > 2006-01-03 16:35:17.201 HandleGopStart: gopset not set, syncing positionMap > 2006-01-03 16:35:17.974 prebuffering pause > 2006-01-03 16:35:17.974 waiting for prebuffer... > 2006-01-03 16:35:17.974 WriteAudio: buffer underrun > 2006-01-03 16:35:18.109 prebuffer wait timed out.. > 2006-01-03 16:35:18.109 waiting for prebuffer... > 2006-01-03 16:35:18.244 prebuffer wait timed out.. > 2006-01-03 16:35:18.244 waiting for prebuffer... > 2006-01-03 16:35:18.379 prebuffer wait timed out.. > 2006-01-03 16:35:18.379 waiting for prebuffer... > 2006-01-03 16:35:18.514 prebuffer wait timed out.. > 2006-01-03 16:35:18.514 waiting for prebuffer... > > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.4.1 (tagged release) loading > ivtv: Linux version: 2.6.15 preempt K7 gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] > tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] > cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] > wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] > tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02040024 > ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 > or 0x02050032. > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) > ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) > ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) > ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB > total) > ivtv0: Create encoder radio stream > ivtv0: Initialized WinTV PVR 150, card #0 > ivtv: ==================== END INIT IVTV ==================== > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
