Hi all,
I just upgraded to the latest linux kernel (2.6.15) and latest stable ivtv
version (0.4.1) but have problems using the tuner. I hope somebody can
help me out here, as the device has already been working with a previous
kernel and ivtv version (don't have the install anymore but I guess it was
2.6.13 with 0.4.0, unfortunately i cannot reproduce this)
Anyway, I only have problems using the tuner. The S-video input works
fine! when I switch to input 0, I only get static/noise, on any frequency.
The previous setup also used tuner=38 (Philips FM1216ME MK3), given as
module argument, but now ivtv automatically detects the tuner correctly (I
guess it is the right one: I can also vaguely hear the sounds of the
tv-channel on /dev/video24, but it sounds like it cannot lock and there's
a lot of noise)
I tried the following versions without any luck (every time cold booting
the machine...)
ivtv: 0.4.0, 0.4.1 and 0.5.1
kernel: 2.6.13, 2.6.14, 2.6.15 (including tuner.ko)
Hopefully somebody can give me a hint how to proceed.
$ lspci -v:
0000:00:10.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 8801
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [44] Power Management version 2
[ivtv log]
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.4.1 (tagged release) loading
ivtv: Linux version: 2.6.15 preempt K7 REGPARM gcc-3.3
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 150 card (cx23416 based)
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 1-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
vtv0: i2c attach to card #0 ok [client=wm8775, addr=1b]
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tveeprom 1-0050: Hauppauge model 26559, rev B260, serial# 7681598
tveeprom 1-0050: tuner model is LG S001D MK3 (idx 60, type 38)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom 0x74)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has radio, has no IR remote
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0 warning: i2c client addr: 0x43 not found for command 0x40047405!
ivtv0: Initialized WinTV PVR 150, card #0
ivtv: ==================== END INIT IVTV ====================
$ lsmod -v
lsmod
ivtv 192020 0
tveeprom 14480 0
tuner 40228 0
wm8775 5900 0
cx25840 22800 0
i2c_algo_bit 9096 1 ivtv
videodev 9344 1 ivtv
i2c_dev 9600 0
i2c_viapro 8596 0
dm_mod 51896 0
asb100 19604 0
hwmon_vid 2688 1 asb100
i2c_core 20240 8
tveeprom,tuner,wm8775,cx25840,i2c_algo_bit,i2c_dev,i2c_viapro,asb100
snd_cmipci 29824 1
snd_pcm 79368 2 snd_cmipci
snd_page_alloc 10376 1 snd_pcm
snd_opl3_lib 9856 1 snd_cmipci
snd_timer 22404 2 snd_pcm,snd_opl3_lib
snd_hwdep 8480 1 snd_opl3_lib
snd_mpu401_uart 7296 1 snd_cmipci
snd_rawmidi 21504 1 snd_mpu401_uart
snd 44216 8
snd_cmipci,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi
soundcore 9696 1 snd
module options for
ivtv: autoload=0 (autoloading didn't work)
Here are some questions I can't answer
1. Do i really need the tda9887 module? I didn't use it in the past, but
ivtv complains about it. It doesn't make any difference though...
2. How do I make the tuner work?
Thanks in advance!
Richard
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
