wondering if anyone knows where on the web i can find a listing of tuners and there # codes for ivtv. i have been searching for literally 5 hours, and cannot find them anywhere. the only thing i found was something on ivtv site that listed some file in some directory, but i searched my entire file system for it, and its not there.
2nd question.
for this tuner model TCL M2523_5N_E (idx 112, type 4) what ivtv tuner code should i use besides 50?
thats the one it is autodetected as, and it only shows snow on mplayer when i open /dev/video0/ i tried changing the channels with the usa frequencies to no avail. i cannot get yast to detect channels, because ivtv is using the wrong tuner module !!! (i think) maybe someone can enlighten me...... ive been searching the net, and googling for days. Thank you!
Linux linux-3l0w 2.6.16.13-4-smp #1 SMP Wed May 3 04:53:23 UTC 2006 i686 athlon i386 GNU/Linux
Suse 10.1
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.3 (tagged release) loading
ivtv: Linux version: 2.6.16.13-4-smp SMP 586 REGPARM gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
usb 4-2: new device found, idVendor=0609, idProduct=031d
usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: eHome Infrared Transceiver
usb 4-2: Manufacturer: SMK
usb 4-2: SerialNumber: SM0068oZ
usb 4-2: configuration #1 chosen from 1 choice
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning (pci_link-0407): PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 [20060127]
ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 201
PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9
eth0: VIA Rhine II at 0x1e000, 00:0e:a6:9d:4e:df, IRQ 201.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
agpgart: Detected VIA KM400/KM400A chipset
agpgart: AGP aperture is 64M @ 0xd8000000
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 209
PCI: Via IRQ fixup for 0000:00:0b.0, from 3 to 1
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[209] MMIO=[e2001000-e20017ff] Max Packet=[2048] IR/IT contexts=[4/8]
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 217
usb 5-1: new full speed USB device using uhci_hcd and address 2
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ACPI Warning (acpi_thermal-0644): Unable to turn cooling device [dffd8ba0] 'on' [20060127]
tveeprom 1-0050: Hauppauge model 26582, rev F0B2, serial# 9602174
tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 4)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is CX25843 (idx 37)
tveeprom 1-0050: decoder processor is CX25843 (idx 30)
tveeprom 1-0050: has no radio, has no IR remote
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
usb 5-1: new device found, idVendor=058f, idProduct=9360
usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: USB Reader
usb 5-1: Manufacturer:
usb 5-1: SerialNumber: 9205291
usb 5-1: configuration #1 chosen from 1 choice
cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
lirc_dev: module not supported by Novell, setting U taint flag.
lirc_dev: IR Remote Control driver registered, at major 61
lirc_mceusb2: module not supported by Novell, setting U taint flag.
lirc_mceusb2: USB remote driver for LIRC v0.22
lirc_mceusb2: Martin Blatter <[EMAIL PROTECTED]>
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800006b0f60]
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)
usb 4-2: reset full speed USB device using uhci_hcd and address 2
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[2]: SMK eHome Infrared Transceiver on usb4:2
usbcore: registered new driver lirc_mceusb2
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 1-0061: tuner type not set
tuner 1-0061: tuner type not set
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
Linux linux-3l0w 2.6.16.13-4-smp #1 SMP Wed May 3 04:53:23 UTC 2006 i686 athlon i386 GNU/Linux
using Suse 10.1
Peace
Steve Reilly
Get your email and more, right on the new Yahoo.com
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
