Hello, I did try the "options ivtv newi2c=0" (and 1), and continue to receive the same error. (I changed the variables, loaded "modprobe ivtv", and "depmod -a" both times What does this variable do? I posted my results from dmesg, and hopefully this helps. Should I maybe be using an older version of the ivtv drivers?
Thanks again, ~eric ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.8.2 (tagged release) loading ivtv: Linux version: 2.6.18-1.2257.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Autodetected Hauppauge WinTV PVR-250 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: Failed to load module msp3400 ivtv0: Encoder revision: 0x02050032 ivtv0: Registered device video0 for encoder MPEG ivtv0: Registered device video32 for encoder YUV ivtv0: Registered device vbi0 for encoder VBI ivtv0: Registered device video24 for encoder PCM audio ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000008 (msp3400) not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 ivtv: ==================== END INIT IVTV ====================
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
