Sebastien Lelong wrote: > > I don't mean the protected code, I mean the command set itself(eg. "when > sending 'LA34', the LCD should the letter A, ..."). If it is in public > property, this is ok ! > Good! > > > No, I don't mean getting the code from the PIC. What I would like to provide > is: > > > - schematics so people can build the controller themselves.
The schematics for the K104 board is on page 3 of the K107 Manual. I think that we are saying the same thing but are using different terms. I am not building a controller but I am sending control codes to the K107 controller to control what/how/where what I send to it is written on the LCD. What you/we want is a library that has all of the commands that can be sent to the K107 to control the LCD. Such as is shown at <http://moderndevice.com/LCD117CommandSummary.htm> but converted into jal. If this is what you are asking, I will write to him now and see what he thinks. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
