[email protected] wrote:
> Allthough the basic lib is working, I'm still working on the library
> to further improve it,
Good, since I'm about to use 'm! I want to build a device which emulates
2 serial ports (and cross my fingers that the PC drivers support 'm).
> however, the main issue right now is that I ran
> into a couple of serious compiler issues during the development, Kyle
> is working on these issues and hopefully everything will be stable in
> the upcoming 2.4j release.
Do you have 2.4j? I've downloaded the beta sources and compiled 2.4j.
For what I've seen it solves some long existing issues.
> In the mean time I'm working on some real
> life examples which come along pretty nicely.
> Bert (van Dam) has tried both examples, the mouse demo and the RS-232
> demo, see Jal list for more details, all you need is a very basic
> board
> The board I use is pretty simple, a PIC18f4550, 270n cap on pin 18,
> Crystal 20 Mhz + 15pf caps and a USB cable connection, reset button on
> pin 1 and a button on RB5 for the bootloader (also added a MAX232 to
> have a debug port, but this is not required when running the
> examples, but is almost a must when doing development).
> People have reported that it also works with a PIC18f2445
I suppose the bootloader and the RB5 button are optional?
Regards, Rob.
--
Rob Hamerling, Vianen, NL (http://www.robh.nl/)
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
