Thanks, I try this months everyday two and three times per day with many paper types and brands. This is made with everyday photo paper because this have an layer with pvc not very good quality and I could remove with hot water + ms musculos(1 teaspoon) and I brushing with teeth brush and then I put pcb in tehnical alcool and once again I brushing, and over again. Now I found coated paperboard (carton cretat), I'll try this someday..
Florin Tanasa http://sites.google.com/site/florintanasa/ 2010/7/28 funlw65 <[email protected]> > Wow! I didn't believed that you will succeed with toner transfer > method (I know I can't) ... Congratulations! > > Vasi(funlw65) > > On Jul 28, 10:29 pm, Florin Tanasa <[email protected]> wrote: > > Hi guys, > > After 2 months I learning how to make pcb using toner transfer method > where > > the tracks are thick 0,25mm. I trying to make the silkscreen using toner > > transfer method but the isolation contain glass (I think) because the > toner > > not adhere. > > This weekend I try to put pieces. > > In reality looks much better because the pictures are taken with phone > > camera. > > > > Florin Tanasahttp://sites.google.com/site/florintanasa/ > > > > DSC00096.JPG > > 1698KViewDownload > > > > DSC00105.JPG > > 1881KViewDownload > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<jallib%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
