Your second example also works fine. With this code I see a countdown
from 1000 to 1, then I see "---------- It Worked! ----------". Please
note that I am using serial_software lib (this is my current setup),
serial_hw should give the same result.
include print
-- setup serial software
const serial_sw_baudrate = 38400
alias serial_sw_tx_pin is pin_B4
alias serial_sw_rx_pin is pin_B5
pin_B4_direction = output
pin_B5_direction = input
include serial_software
serial_sw_init()
var byte index
var word table[4] = {0,0,0,0}
index = 0
table[index] = 1000
while table[index] != 0 loop
_usec_delay(250)
print_word_dec(serial_sw_data,table[index])
print_crlf(serial_sw_data)
table[index] = table[index] - 1
end loop
print_crlf(serial_sw_data)
const byte str1[] = "---------- It Worked! ----------"
print_string(serial_sw_data, str1)
-- end of program
forever loop
end loop
--
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en.
