I forgot to mention, i am indeed working under linux, i will try and look in a virtual windows setup if these things occur there also. I will report back. Thank you for looking into my given bug suspects so far.
Dirk On 6 sep, 13:54, funlw65 <[email protected]> wrote: > It can be a problem with the linux binary? (Not yet able to test, > sorry). > > Vasi(funlw65) > > On Sep 6, 4:49 am, mattschinkel <[email protected]> wrote: > > > Your second example also works fine. With this code I see a countdown > > from 1000 to 1, then I see "---------- It Worked! ----------". Please > > note that I am using serial_software lib (this is my current setup), > > serial_hw should give the same result. > > > include print > > > -- setup serial software > > const serial_sw_baudrate = 38400 > > alias serial_sw_tx_pin is pin_B4 > > alias serial_sw_rx_pin is pin_B5 > > pin_B4_direction = output > > pin_B5_direction = input > > include serial_software > > serial_sw_init() > > > var byte index > > var word table[4] = {0,0,0,0} > > index = 0 > > table[index] = 1000 > > > while table[index] != 0 loop > > _usec_delay(250) > > print_word_dec(serial_sw_data,table[index]) > > print_crlf(serial_sw_data) > > table[index] = table[index] - 1 > > end loop > > > print_crlf(serial_sw_data) > > const byte str1[] = "---------- It Worked! ----------" > > print_string(serial_sw_data, str1) > > > -- end of program > > forever loop > > end loop -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
