Hello, Can any one help me figure out why am I not able to get mails from external emails address. Details are mentioned below.
Thanks, Imran -----Original Message----- From: Imran Balkhi [mailto:imran@;sibisoft.com] Sent: Monday, October 21, 2002 7:18 PM To: James Users List; [EMAIL PROTECTED] Subject: RE: Cannot send to external email address Peter, Thanks for the suggestions. Now I am able to send email to external email addresses from localhost. However, I am not able to receive mails from external email addresses. Here is my setup. James running on 192.168.7.45 WAN IP address 64.173.xx.xx (Masked for security reason) I have routed ports 25 & 110 from 64.173.xx.xx to 192.168.7.45 Outlook client setup: --------------------- email imran@localhost Reply-to [EMAIL PROTECTED] POP3 64.173.xx.xx SMTP 64.173.xx.xx My Server Requires Authentication is selected Message retuned with the following error message: -------------------------------------------------- xxxxxxxxxxxx Start Error MSGxxxxxxxxxxxxxxxxxxxxxxxx Your message has encountered delivery problems to the following recipient(s): [EMAIL PROTECTED] Delivery failed 530 Authentication Required No recipients were successfully delivered to. Reporting-MTA: dns; mailhost.sanjoseweb.com Received-From-MTA: dns; c1265355c (adsl-64-173-xx-xx.dsl.snfc21.pacbell.net [64.173.xx.xx]) Arrival-Date: Mon, 21 Oct 2002 19:01:09 -0700 Final-Recipient: rfc822; [EMAIL PROTECTED] Action: failed Status: 5.0.0 (Permanent failure - no additional status information available) Remote-MTA: dns; 64.173.xx.xx Diagnostic-Code: smtp; 530 Authentication Required xxxxxxxxxxxx End Error MSGxxxxxxxxxxxxxxxxxxxxxxxx yyyyyyyyyyyy Start smtpserver.log yyyyyyyyyyyyyyyyy 1035252102987 [INFO ] (smtpserver): SMTPServer init... 1035252102997 [INFO ] (smtpserver): SMTPServer ...init end 1035252116366 [INFO ] (smtpserver): Hello Name is: c1265355-c 1035252116366 [DEBUG ] (smtpserver): Max message size is: 0 1035252116456 [INFO ] (smtpserver): Connection from mailhost.sanjoseweb.com (209.237.24.10) 1035252116496 [INFO ] (smtpserver): Command received: EHLO mailhost.sanjoseweb.com 1035252116657 [INFO ] (smtpserver): Command received: MAIL FROM:<[EMAIL PROTECTED]> 1035252116687 [INFO ] (smtpserver): Command received: RCPT TO:<[EMAIL PROTECTED]> 1035252116687 [ERROR ] (smtpserver): Authentication is required for mail request 1035252116707 [INFO ] (smtpserver): Command received: RSET 1035252116757 [INFO ] (smtpserver): Command received: QUIT yyyyyyyyyyyy Start smtpserver.log yyyyyyyyyyyyyyyyy I am also attaching my updated config.xml file. Thanks, Imran
<?xml version="1.0"?> <!-- README! This configuration file is designed to run without alteration, for simple tests. It assumes you have a DNS server on localhost and assigns a root pasword of root. For production use, or in case the defaults do not suit you, the items you are most likely to need to change are preceeded by a CHECKME! or CONFIRM? comment in the left margin. This is $Revision: 1.22 $ Committed on $Date: 2002/03/11 21:46:32 $ by: $Author: serge $ --> <config> <!-- The James block --> <James> <!-- CHECKME! Set this to the right email address for error reports --> <postmaster> [EMAIL PROTECTED] </postmaster> <!-- CONFIRM? --> <!-- servernames identifies the DNS namespace served by this instance of James. If autodetect is TRUE, James wil attempt to discover its own name AND use any specified servernames. If autodetect is FALSE, James will use only the specified servernames. By default, the servername 'localhost' is specified. This can be removed, if required. --> <servernames autodetect="TRUE"> <!-- <servername>To override autodetected server names uncomment this. </servername>--> <servername>localhost</servername> </servernames> <!-- Set whether user names are case sensitive or insensitive --> <!-- Set whether to enable local aliases --> <usernames ignoreCase="TRUE" enableAliases="TRUE" enableForwarding="TRUE"/> <!-- The inbox repository is the location for users inboxes --> <!-- Default setting: file based repository - enter path ( :/// for absolute) --> <inboxRepository> <repository destinationURL="file://var/mail/inboxes/" type="MAIL"> </repository> </inboxRepository> <!-- Alternative inbox repository definition for DB use. --> <!-- The format for the destinationURL is "db://<data-source>/<table>" - <data-source> is the datasource name set up in the database-connections block, below - <table> is the name of the table to store user inboxes in The user name is used as <repositoryName> for this repository config. <inboxRepository> <repository destinationURL="db://maildb/inbox/" type="MAIL"> </repository> </inboxRepository> --> </James> <!-- The James Spool Manager block --> <spoolmanager> <!-- number of spool threads --> <threads> 10 </threads> <!-- Set the packages from which to load mailets and matches --> <mailetpackages> <mailetpackage>org.apache.james.transport.mailets</mailetpackage> </mailetpackages> <matcherpackages> <matcherpackage>org.apache.james.transport.matchers</matcherpackage> </matcherpackages> <!-- Processor CONFIGURATION SAMPLE: root is the first processor all mails enter --> <processor name="root"> <!-- Checks that the MAIL FROM command was for a valid domain. Important for spam prevention. --> <!-- <mailet match="SenderInFakeDomain" class="ToProcessor"> <processor> spam </processor> </mailet> --> <!-- Important check to avoid race conditions --> <mailet match="RelayLimit=30" class="Null"> </mailet> <!-- Check for delivery from a known spam server --> <mailet match="InSpammerBlacklist=blackholes.mail-abuse.org" class="ToProcessor"> <processor> spam </processor> <notice> Rejected - see http://www.mail-abuse.org/rbl/ </notice> </mailet> <mailet match="InSpammerBlacklist=dialups.mail-abuse.org" class="ToProcessor"> <processor> spam </processor> <notice> Dialup - see http://www.mail-abuse.org/dul/ </notice> </mailet> <mailet match="InSpammerBlacklist=relays.mail-abuse.org" class="ToProcessor"> <processor> spam </processor> <notice> Open spam relay - see http://www.mail-abuse.org/rss/ </notice> </mailet> <!-- Sample matching to kill a message (send to Null) --> <mailet match="RecipientIs=badboy@badhost" class="Null"> </mailet> <!-- Sends remaining mails to the transport processor for either local or remote delivery --> <mailet match="All" class="ToProcessor"> <processor> transport </processor> </mailet> </processor> <!-- Processor CONFIGURATION SAMPLE: error is the processor mails with failure conditions enter --> <processor name="error"> <!-- Logs any messages to the repository specified --> <mailet match="All" class="ToRepository"> <repositoryPath> file://var/mail/error/</repositoryPath> <!-- <repositoryPath> db://conf/mail-error.properties </repositoryPath> --> <passThrough> true </passThrough> </mailet> <!-- If you want to notify the sender their message was marked as spam, uncomment this--> <mailet match="All" class="NotifySender"> </mailet> <!-- If you want to notify the postmaster that a message was marked as spam, uncomment this--> <mailet match="All" class="NotifyPostmaster"> </mailet> </processor> <!-- Processor CONFIGURATION SAMPLE: transport is a sample custom processor for local or remote delivery --> <processor name="transport"> <!-- Is the recipient is for a local account, deliver it locally --> <mailet match="RecipientIsLocal" class="LocalDelivery"> </mailet> <!-- If the host is handled by this server and it did not get locally delivered, this is an invalid recipient --> <mailet match="HostIsLocal" class="ToProcessor"> <processor>error</processor> </mailet> <!-- CHECKME! Anti-relay mailet: Add your network address here, e.g. "RemoteAddrNotInNetwork=127.0.0.1, abc.de.*" --> <!-- This matcher-mailet pair can prevent relaying... if you change this, you risk making your mail server an open relay point for spammers . NOTE 1: the order of matcher-mailets is important: it must come after valid local recipients have been dealt with but before any attempt is made to delivery the mail remotely. NOTE 2: Add your own network, if you want to relay mail outwards NOTE 3: If you use SMTP AUTH, you may want to comment this so users who are on the road can still use the server --> <!-- <mailet match="RemoteAddrNotInNetwork=127.0.0.1" class="ToProcessor"> <processor> spam </processor> </mailet> --> <!-- Attempt remote delivery using the specified repository for the spool, using delay time to retry delivery and the maximum number of retries --> <mailet match="All" class="RemoteDelivery"> <outgoing> file://var/mail/outgoing/ </outgoing> <!-- <outgoing> db://conf/mail-outgoing.properties </outgoing> --> <!-- Number of milliseconds between delivery attempts --> <delayTime> 21600000 </delayTime> <!-- Number of failed attempts before returning to the sender --> <maxRetries> 5 </maxRetries> <!-- The number of threads that should be trying to deliver outgoing messages --> <deliveryThreads> 1 </deliveryThreads> <!-- A single mail server to deliver all outgoing messages. This is useful if this is a backup or failover machine, or if you otherwise want all messages to be sent only to particular mail server, regardless of the email addresses specified in the message --> <!-- <gateway> otherserver.mydomain.com </gateway> --> <!-- If your gateway mail server is listening on a port other than 25, you can set James to connect to it on that port --> <!-- <gatewayPort> 25 </gatewayPort> --> </mailet> </processor> <!-- Processor CONFIGURATION SAMPLE: spam is where messages detected as relaying or other problems will get sent. You can either log these, bounce these, or just ignore them. --> <processor name="spam"> <!-- If you wanted, you could just destroy messages, uncomment this matcher/mailet <mailet match="All" class="Null"> </mailet> --> <!-- If you want to notify the sender their message was marked as spam, uncomment this <mailet match="All" class="NotifySender"> </mailet> --> <!-- If you want to notify the postmaster that a message was marked as spam, uncomment this <mailet match="All" class="NotifyPostmaster"> </mailet> --> <!-- Out of the box, this will log the message to a repository --> <mailet match="All" class="ToRepository"> <repositoryPath>file://var/mail/spam/</repositoryPath> </mailet> </processor> </spoolmanager> <!-- CONFIRM? Enter ip address of your DNS server, one per element --> <dnsserver> <servers> <server>206.13.28.12</server> <server>216.34.6.183</server> <server>206.13.31.12</server> <!--<server>127.0.0.1</server>--> <!--<server> put extra dns server address here </server>--> </servers> <authoritative>false</authoritative> </dnsserver> <remotemanager> <port>4555</port> <!-- <bind> </bind> uncomment this if you want to bind to a specific inetaddress --> <!-- <useTLS>TRUE</useTLS> uncomment this if you want to use TLS (SSL) on this port --> <handler> <!-- helloName is the single host name this instance of James will use to identify itself for example, in SMTP and POP3 greetings. If autodetect is TRUE, James will attempt to discover its own name OR use 'localhost'. If autodetect is FALSE, James will use the value given OR 'localhost' --> <helloName autodetect="TRUE">myMailServer</helloName> <administrator_accounts> <!-- CHECKME! Change the default password! --> <!-- FILL ME!!!!!! You must provide a password for your administrator accounts (cannot be blank) --> <account login="root" password="root"/> </administrator_accounts> <connectiontimeout> 60000 </connectiontimeout> </handler> </remotemanager> <pop3server> <port>110</port> <!-- <port>995</port> --> <!-- port 995 is the well-known/IANA registered port for POP3S ie over SSL/TLS --> <!-- <bind> </bind> uncomment this if you want to bind to a specific inetaddress--> <!-- <useTLS>TRUE</useTLS> uncomment this if you want to use TLS (SSL) on this port --> <handler> <!-- helloName is the single host name this instance of James will use to identify itself for example, in SMTP and POP3 greetings. If autodetect is TRUE, James will attempt to discover its own name OR use 'localhost'. If autodetect is FALSE, James will use the value given OR 'localhost' --> <helloName autodetect="TRUE">myMailServer</helloName> <connectiontimeout>120000</connectiontimeout> </handler> </pop3server> <smtpserver> <port>25</port> <!--<bind></bind> uncomment this if you want to bind to a specific inetaddress --> <!--<useTLS>TRUE</useTLS> uncomment this if you want to use TLS (SSL) on this port --> <handler> <!-- helloName is the single host name this instance of James will use to identify itself for example, in SMTP and POP3 greetings. If autodetect is TRUE, James will attempt to discover its own name OR use 'localhost'. If autodetect is FALSE, James will use the value given OR 'localhost' --> <helloName autodetect="TRUE">myMailServer</helloName> <connectiontimeout>360000</connectiontimeout> <authRequired>true</authRequired> <!-- uncomment this if you want SMTP AUTH support. This is useful if you have users who need to use the email server on the road, while not having your server act as an open relay! --> <verifyIdentity>true</verifyIdentity> <!-- uncomment this if you want to verify that the MAIL FROM: address is the same user that authenticated. This prevents a user of your mail server from acting as somebody else --> <!-- This sets the maximum allowed message size for the smtphandler in KBytes. The value defaults to 0, which means no limit. --> <maxmessagesize>0</maxmessagesize> </handler> </smtpserver> <nntpserver> <port>119</port> <!-- <port>563</port> --> <!-- port 563 is the well-known/IANA registered port for NNTPS ie over SSL/TLS --> <!-- <bind> </bind> uncomment this if you want to bind to a specific inetaddress--> <!-- <useTLS>TRUE</useTLS> uncomment this if you want to use TLS (SSL) on this port --> <handler> <!-- helloName is the single host name this instance of James will use to identify itself for example, in SMTP and POP3 greetings. If autodetect is TRUE, James will attempt to discover its own name OR use 'localhost'. If autodetect is FALSE, James will use the value given OR 'localhost' --> <helloName autodetect="TRUE">myMailServer</helloName> <connectiontimeout>120000</connectiontimeout> </handler> </nntpserver> <nntpauth> <!-- make this true, if you want only authenticated users to access NNTP--> <authRequired>false</authRequired> </nntpauth> <nntp-repository> <!-- make this true to disallow posting to all newsgroups--> <readOnly>false</readOnly> <rootPath>file:///var/nntp/groups</rootPath> <tempPath>file:///var/nntp/temp</tempPath> <articleIDPath>file:///var/nntp/articleid</articleIDPath> <articleIDDomainSuffix>news.james.apache.org</articleIDDomainSuffix> <!-- these additional news groups would be created and exposed--> <newsgroups> <newsgroup>org.apache.james.dev</newsgroup> <newsgroup>org.apache.james.user</newsgroup> <newsgroup>org.apache.avalon.dev</newsgroup> <newsgroup>org.apache.avalon.user</newsgroup> </newsgroups> <spool> <configuration> <spoolPath>file:///var/nntp/spool</spoolPath> <!-- number of threads that process spooler related tasks --> <threadCount>1</threadCount> <!-- the spool thread(s) should idle for some time, if it has nothing to do --> <threadIdleTime>1000</threadIdleTime> </configuration> </spool> </nntp-repository> <!-- The High Level Storage block --> <mailstore> <repositories> <repository class="org.apache.james.mailrepository.AvalonMailRepository"> <protocols> <protocol>file</protocol> </protocols> <types> <type>MAIL</type> </types> </repository> <repository class="org.apache.james.mailrepository.AvalonSpoolRepository"> <protocols> <protocol>file</protocol> </protocols> <types> <type>SPOOL</type> </types> </repository> <!-- These repositories store the entire message in the database --> <repository class="org.apache.james.mailrepository.JDBCMailRepository"> <protocols> <protocol>db</protocol> </protocols> <types> <type>MAIL</type> </types> <config> <sqlFile>file://conf/sqlResources.xml</sqlFile> </config> </repository> <repository class="org.apache.james.mailrepository.JDBCSpoolRepository"> <protocols> <protocol>db</protocol> </protocols> <types> <type>SPOOL</type> </types> <config> <sqlFile>file://conf/sqlResources.xml</sqlFile> </config> </repository> <!-- These repositories store message delivery and headers in the DB, and the body to the filesystem --> <repository class="org.apache.james.mailrepository.JDBCMailRepository"> <protocols> <protocol>dbfile</protocol> </protocols> <types> <type>MAIL</type> </types> <config> <sqlFile>file://conf/sqlResources.xml</sqlFile> <filestore>file://var/dbmail</filestore> </config> </repository> <repository class="org.apache.james.mailrepository.JDBCSpoolRepository"> <protocols> <protocol>dbfile</protocol> </protocols> <types> <type>SPOOL</type> </types> <config> <sqlFile>file://conf/sqlResources.xml</sqlFile> <filestore>file://var/dbmail</filestore> </config> </repository> </repositories> <!-- Spool repository configuration --> <!-- The spool repository is a singular location where incoming mails are temporarily stored before being processed. (ex. file://c:/james/spool/) --> <!-- Default setting: file based repository - enter path ( :/// for absolute) --> <spoolRepository> <repository destinationURL="file://var/mail/spool/" type="SPOOL"> </repository> </spoolRepository> <!-- Alternative spool repository definition for JDBC use --> <!-- <spoolRepository> <repository destinationURL="db://maildb/message/spool" type="SPOOL"> </repository> </spoolRepository> --> </mailstore> <!-- The User Storage block --> <users-store> <!-- Configure User Repositories here. User repositories are required for the following purposes: - hold information about Users of the James mail server - hold lists of users for the listserv mailet Currently, 2 different storage options are available: - file-based storage using Java serialisation - database-backed storage (Use of database or file-system is defined on a "per-repository" basis) Note: Two user repositories are required for default configuration: LocalUsers - the users for whom you are providing POP3, NNTP, or AUTH service list-james - the users of the james@localhost mailiinglist --> <!-- Default: File-based user repositories Use these configurations to store user info in the filesystem --> <!-- The LocalUsers repository, for storing James' User info. --> <repository name="LocalUsers" class="org.apache.james.userrepository.UsersFileRepository"> <destination URL="file://var/users/"/> </repository> <!-- The list used by the default ListServ mailet --> <repository name="list-james" class="org.apache.james.userrepository.UsersFileRepository"> <destination URL="file://var/lists/list-james/"/> </repository> <!-- Database backed user repositories Use these configurations to store user info in a database. Note: the <data-source> element must refer to a connection configured in the <database-connections> configuration section. --> <!-- The LocalUsers repository, for storing James' User info. --> <!-- <repository name="LocalUsers" class="org.apache.james.userrepository.JamesUsersJdbcRepository" destinationURL="db://maildb/users"> <sqlFile>file://conf/sqlResources.xml</sqlFile> </repository> --> <!-- The list used by the default ListServ mailet --> <!-- <repository name="list-james" class="org.apache.james.userrepository.ListUsersJdbcRepository" destinationURL="db://maildb/lists/list-james"> <sqlFile>file://conf/sqlResources.xml</sqlFile> </repository> --> <!-- An example mailinglist repository, with no "listName" parameter specified. Uses the default value from the sql definition file. --> <!-- Testing purposes only. --> <!-- <repository name="list-test" class="org.apache.james.userrepository.ListUsersJdbcRepository" destinationURL="db://maildb/lists"> <sqlFile>file://conf/sqlResources.xml</sqlFile> </repository> --> <!-- An example UserRepository for DefaultUser implementations. --> <!-- Testing purposes only. --> <!-- <repository name="default-users" class="org.apache.james.userrepository.DefaultUsersJdbcRepository" destinationURL="db://maildb/DefaultUsers"> <sqlFile>file://conf/sqlResources.xml</sqlFile> </repository> --> </users-store> <!-- The database-connections block --> <database-connections> <!-- Confugure database connections here. These connections are referred to by name elsewhere in the config file --> <!-- CHECKME! To allow James to use a database, configure the database connection here --> <data-sources> <!-- Example, connecting to a MySQL database called "mail" on localhost --> <!-- <data-source name="maildb" class="org.apache.james.util.mordred.JdbcDataSource"> <driver>org.gjt.mm.mysql.Driver</driver> <dburl>jdbc:mysql://127.0.0.1/mail</dburl> <user>username</user> <password>password</password> <max>2</max> </data-source> <data-source name="maildb" class="org.apache.james.util.mordred.JdbcDataSource"> <driver>com.inet.tds.TdsDriver</driver> <dburl>jdbc:inetdae7:127.0.0.1?database=James</dburl> <user>sa_james</user> <password>blahblah</password> <max>2</max> </data-source> --> </data-sources> </database-connections> <!-- Configuration for Cornerstone Blocks only after here NOTHING BELOW THIS SHOULD NEED CHANGING, (unless you want secure sockets (TLS)) --> <!-- The Storage block --> <objectstorage> <repositories> <repository class="org.apache.avalon.cornerstone.blocks.masterstore.File_Persistent_Object_Repository"> <protocols> <protocol>file</protocol> </protocols> <types> <type>OBJECT</type> </types> <models> <model>SYNCHRONOUS</model> <model>ASYNCHRONOUS</model> <model>CACHE</model> </models> </repository> <repository class="org.apache.avalon.cornerstone.blocks.masterstore.File_Persistent_Stream_Repository"> <protocols> <protocol>file</protocol> </protocols> <types> <type>STREAM</type> </types> <models> <model>SYNCHRONOUS</model> <model>ASYNCHRONOUS</model> <model>CACHE</model> </models> </repository> </repositories> </objectstorage> <!-- The Socket Manager block --> <sockets> <server-sockets> <factory name="plain" class="org.apache.avalon.cornerstone.blocks.sockets.DefaultServerSocketFactory" /> <!-- <factory name="ssl" class="org.apache.avalon.cornerstone.blocks.sockets.TLSServerSocketFactory"> <keystore> <file>conf/keystore</file> <password>secret</password> <type>JKS</type> <protocol>TLS</protocol> <algorithm>SunX509</algorithm> <authenticate-client>false</authenticate-client> </keystore> </factory> --> </server-sockets> <client-sockets> <factory name="plain" class="org.apache.avalon.cornerstone.blocks.sockets.DefaultSocketFactory" /> </client-sockets> </sockets> <thread-manager> <thread-group> <name>default</name> <!-- normal priority == 5, max-priority = 10 --> <priority>5</priority> <!-- are threads deamon threads ? --> <is-daemon>false</is-daemon> <max-threads>40</max-threads> <!-- these are ignored at the moment but will be fixed in later revisions --> <min-threads>20</min-threads> <min-spare-threads>20</min-spare-threads> </thread-group> </thread-manager> </config>
-- To unsubscribe, e-mail: <mailto:james-user-unsubscribe@;jakarta.apache.org> For additional commands, e-mail: <mailto:james-user-help@;jakarta.apache.org>