Hello everyone, I thought I would try here and see if anyone can resolve
this.
I am having problems setting up the JSSI servlet correctly.
The system I am using is JSSI 1.1.2, Apache 1.3.11 (with DSO support),
JServ 1.1, Caldera Linux 2.2.5.
The problem:
I have installed everything following the documentation, I can run
servlets from in thier zone.
The other day I installed the JSSI servlet, added the required lines to
the various properties files.
So in theory any file that ends with either .jhtml or .pjhtml gets
passed to the JSSI servlet.
What I find is, if I tell the browser to go to a non-existant page with
the .jhtml extension. The JSSI servlet starts up (I am watching the
logs) and complains about a non existant page.
Now, having stopped and restarted apache, if I try to go to a page that
DOES exist with the .jhtml extension, the JSSI servlet does NOT startup
and the page is served to me untouched (ie the embeded servlet is not
run).
I find that if I go directly to the JSSI servlet, ie
/test/org.apache.servlet.ssi.SSI , I can start it up. I also find that
if I run the servlet directly with a html file at the end (ie
/commands.jhtml) then the embeded servlet is run.
I have had the ApJservAction .jhtml directive in both Jserv.conf and
also in httpd.conf, both do what I have described above.
Can anyone see what I have done wrong? Could you tell me?
I have attached my logs in the hope that it might be of help. (apologies
for the length)
Rob
Jserv.conf:
###############################################################################
# Apache JServ Configuration
File #
###############################################################################
# Note: this file should be appended or included into your httpd.conf
# Tell Apache on win32 to load the Apache JServ communication module
#LoadModule jserv_module modules/ApacheModuleJServ.dll
# Tell Apache on Unix to load the Apache JServ communication module
# For shared object builds only!!!
LoadModule jserv_module
/home/robertm/WORK/apache/mine/libexec/mod_jserv.so
<IfModule mod_jserv.c>
# Whether Apache must start Apache JServ or not (On=Manual
Off=Autostart)
# Syntax: ApJServManual [on/off]
# Default: "Off"
ApJServManual Off
# Properties filename for Apache JServ in Automatic Mode.
# In manual mode this directive is ignored
# Syntax: ApJServProperties [filename]
# Default: "./conf/jserv.properties"
ApJServProperties
/home/robertm/WORK/apache/mine/conf/jserv/jserv.properties
# Log file for this module operation relative to Apache root directory.
# Set the name of the trace/log file. To avoid possible confusion about
# the location of this file, an absolute pathname is recommended.
#
# This log file is different than the log file that is in the
# jserv.properties file. This is the log file for the C portion of
Apache
# JServ.
#
# On Unix, this file must have write permissions by the owner of the JVM
# process. In other words, if you are running Apache JServ in manual
mode
# and Apache is running as user nobody, then the file must have its
# permissions set so that that user can write to it.
# Syntax: ApJServLogFile [filename]
# Default: "./logs/mod_jserv.log"
# Note: when set to "DISABLED", the log will be redirected to Apache
error log
ApJServLogFile /home/robertm/WORK/apache/mine/logs/mod_jserv.log
# Log Level for this module
# Syntax: ApJServLogLevel
[debug|info|notice|warn|error|crit|alert|emerg]
# Default: info (unless compiled w/ JSERV_DEBUG, in which case it's
debug)
ApJServLogLevel notice
# Protocol used by this host to connect to Apache JServ
# (see documentation for more details on available protocols)
# Syntax: ApJServDefaultProtocol [name]
# Default: "ajpv12"
ApJServDefaultProtocol ajpv12
# Default host on which Apache JServ is running
# Syntax: ApJServDefaultHost [hostname]
# Default: "localhost"
#ApJServDefaultHost java.apache.org
# Default port that Apache JServ is listening to
# Syntax: ApJServDefaultPort [number]
# Default: protocol-dependant (for ajpv12 protocol this is "8007")
ApJServDefaultPort 8007
# The amount of time to give to the JVM to start up as well
# as the amount of time to wait to ping the JVM to see if it
# is alive. Slow or heavily loaded machines might want to
# increase this value.
# Default: 10 seconds
# ApJServVMTimeout 10
# Passes parameter and value to specified protocol.
# Syntax: ApJServProtocolParameter [name] [parameter] [value]
# Default: NONE
# Note: Currently no protocols handle this. Introduced for future
protocols.
# Apache JServ secret key file relative to Apache root directory.
# Syntax: ApJServSecretKey [filename]
# Default: "./conf/jserv.secret.key"
# Warning: if authentication is DISABLED, everyone on this machine (not
just
# this module) may connect to your servlet engine and execute servlet
# bypassing web server restrictions. See the documentation for more
information
#ApJServSecretKey
/home/robertm/WORK/apache/mine/conf/jserv/jserv.secret.key
ApJServSecretKey DISABLED
# Mount point for Servlet zones
# (see documentation for more information on servlet zones)
# Syntax: ApJServMount [name] [jserv-url]
# Default: NONE
# Note: [name] is the name of the Apache URI path to mount jserv-url on
# [jserv-url] is something like "protocol://host:port/zone"
# If protocol, host or port are not specified, the values from
# "ApJServDefaultProtocol", "ApJServDefaultHost" or
"ApJServDefaultPort"
# will be used.
# If zone is not specified, the zone name will be the first
subdirectory of
# the called servlet.
# Example: "ApJServMount /servlets /myServlets"
# if user requests "http://host/servlets/TestServlet"
# the servlet "TestServlet" in zone "myServlets" on default host
# thru default protocol on defaul port will be requested
# Example: "ApJServMount /servlets ajpv12://localhost:8007"
# if user requests "http://host/servlets/myServlets/TestServlet"
# the servlet "TestServlet" in zone "myServlets" will be requested
# Example: "ApJServMount /servlets
ajpv12://jserv.mydomain.com:15643/myServlets"
# if user requests "http://host/servlets/TestServlet" the servlet
# "TestServlet" in zone "myServlets" on host "jserv.mydomain.com" using
# "ajpv12" protocol on port "15643" will be executed
#ApJServMount /servlets /root
#ApJServMount /servlet /root
ApJServMount /test /test
<Location /test>
AllowOverride All
order allow,deny
deny from all
allow from localhost
allow from tarasis.pfe
AuthName "servlet area"
AuthType Basic
AuthUserFile /home/robertm/WORK/apache/mine/conf/users
require user robertm testusr daveg
satisfy any
</Location>
# Whether <VirtualHost> inherits base host mount points or not
# Syntax: ApJServMountCopy [on/off]
# Default: "On"
# Note: This directive is meaninful only when virtual hosts are being
used
ApJServMountCopy on
# Executes a servlet passing filename with proper extension in
PATH_TRANSLATED
# property of servlet request.
# Syntax: ApJServAction [extension] [servlet-uri]
# Defaults: NONE
# Notes: This is used for external tools.
#ApJServAction .jsp /servlets/org.gjt.jsp.JSPServlet
#ApJServAction .gsp /servlets/com.bitmechanic.gsp.GspServlet
#ApJServAction .jhtml /test/org.apache.servlet.ssi.SSI
ApJServAction .jhtml /test/JSSI
ApJServAction .pjhtml /test/PJSSI
#ApJServAction .xml /servlets/org.apache.cocoon.Cocoon
# Enable the Apache JServ status handler with the URL of
# "http://servername/jserv/" (note the trailing slash!)
# Change the "deny" directive to restrict access to this status page.
#<Location /jserv-status/>
# SetHandler jserv-status
# Order deny,allow
# Deny from all
# Allow from localhost
#</Location>
############################## W A R N I N G
##################################
# Remember to disable or otherwise protect the execution of the Apache
JServ #
# Status Handler (see right above) on a production environment since
this may #
# give untrusted users the ability to obtain restricted information on
your #
# servlets and their initialization arguments such as JDBC passwords
and #
# other important information. The Apache JServ Status Handler should
be #
# accessible only by system
administrators. #
###############################################################################
</IfModule>
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Test.properties
###############################################################################
# Servlet Zone Configuration
File #
###############################################################################
################################ W A R N I N G
################################
#
# Unlike normal Java properties, JServ configurations have some
important
# extentions:
#
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in a
# comma-separated list.
#
###############################################################################
# List of Repositories
#######################
# The list of servlet repositories controlled by this servlet zone
# Syntax: repositories=[repository],[repository]...
# Default: NONE
# Note: The classes you want to be reloaded upon modification should be
put
# here.
#repositories=/home/robertm/WORK/apache/servlets/test/ApacheJSSI.jar
repositories=/home/robertm/WORK/apache/servlets/test/back
repositories=/home/robertm/WORK/apache/servlets/test/
# Classloader parameters
#########################
# Enable servlet class autoreloading.
# Syntax: autoreload.classes=[true,false] (boolean)
# Default: true
autoreload.classes=true
# Enable servlet resourced autoreloading (properties and other loaded
resources)
# Syntax: autoreload.file=[true,false] (boolean)
# Default: true
autoreload.file=true
# Set the number of millisecond to wait before giving up on initializing
a servlet.
# (a timeout of zero means no timeout)
# Syntax: init.timeout=(long)>0
# Default: 10000 (10 secs)
init.timeout=10000
# Set the number of millisecond to wait before giving up on destroying a
servlet.
# (a timeout of zero means no timeout)
# Syntax: destroy.timeout=(long)>0
# Default: 10000 (10 secs)
destroy.timeout=10000
# Set whether or not to use cookies to maintain session state.
# If false, then response.encodeUrl() will always be the method
# to maintain session state. If true, then the servlet engine will
# attempt to set a cookie when request.getSession(true) is called.
# Syntax: session.useCookies=[true,false] (boolean)
# Default: true
session.useCookies=true
# Set the number of millisecond to wait before invalidating an unused
session.
# Syntax: session.timeout=(long)>0
# Default: 1800000 (30 mins)
session.timeout=1800000
# Set how frequently (milliseconds) to check for timed-out sessions.
# Syntax: session.checkFrequency=(long)>0
# Default: 30000 (30 secs)
session.checkFrequency=30000
# SingleThreadModel Servlets parameters
########################################
# Set the initial capacity of the STM servlets pool.
# Syntax: singleThreadModelServlet.initialCapacity=(int)>1
# Default: 5
singleThreadModelServlet.initialCapacity=5
# Set the number of servlet instances should be added to the pool if
found empty.
# Syntax: singleThreadModelServlet.incrementCapacity=(int)>1
# Default: 5
singleThreadModelServlet.incrementCapacity=5
# Set the maximum capacity of the STM pool
# Syntax: singleThreadModelServlet.maximumCapacity=(int)>1
# Default: 10
singleThreadModelServlet.maximumCapacity=10
################### S E R V L E T P A R A M E T E R S
######################
################################## N O T E
####################################
# When "classname" is specified, it means a Java dot-formatter full
class name
# without the ".class". For example, a class with source file named
# "Dummy.java" with a package name "org.fool" is defined as
"org.fool.Dummy".
#
# Since each servlet may have lots of private initialization data,
Apache JServ
# allows you to store those servlet initArgs in a separate file. To do
this,
# simply do not set any initArgs in this file: Apache JServ will then
look for
# a file named "[servlet classname].initargs" in the same directory of
that
# class. Note that this may work with even class archives.
###############################################################################
# Startup Servlets
###################
# Comma or space delimited list of servlets to launch on startup.
# This can either be a class name or alias.
# Syntax: servlets.startup=[classname or alias],[classname or alias],...
# Default: NONE
# servlets.startup=hello,snoop,org.fool.Dummy
# Servlet Aliases
##################
# This defines aliases from which servlets can be invoked.
# Each alias give a new instance of the servlet. This means that if a
servlet
# is invoked both by class name and by alias name, it will result in
_TWO_
# instances of the servlet being created.
# Syntax: servlet.[alias].code=[classname] (String)
# Default: NONE
# servlet.snoop.code=SnoopServlet
# servlet.hello.code=org.fool.Dummy
servlet.PJSSI.code=org.apache.servlet.ssi.ParameterPropagatingSSI
servlet.JSSI.code=org.apache.servlet.ssi.SSI
# Global Init Parameters
#########################
# Parameters passed here are given to each of servlets. You should put
# configuration information that is common to all servlets.
#
# The value of the property is a comma delimited list of "name=value"
pairs
# that are accessible to the servlet via the method getInitParameter()
# in ServletConfig.
# Syntax: servlets.default.initArgs=[name]=[value],[name]=[value],...
# Default: NONE
# servlets.default.initArgs=common.to.everybody=Hi everybody!
# Servlet Init Parameters
##########################
# These properties define init parameters for each servlet that is
invoked
# by its classname.
# Syntax: servlet.[classname].initArgs=[name]=[value],[name]=[value],...
# Default: NONE
# servlet.org.fool.Dummy.initArgs=message=I'm a dummy servlet
#servlet.JSSI.initArgs=SSISiteRoot=/home/robertm/WORK/apache/servlets,expires=-1000
#servlet.PJSSI.initArgs=PropagateParameters=JServSessionId
#servlet.PJSSI.initArgs=buffered=yes
#servlet.PJSSI.initArgs=SSISiteRoot=/home/robertm/WORK/apache/servlets
# Aliased Servlet Init Parameters
##################################
# These properties define init parameters for each servlet that is
invoked
# by its alias.
# Syntax: servlet.[alias].initArgs=[name]=[value],[name]=[value],...
# Default: NONE
# servlet.snoop.initArgs=message=I'm a snoop servlet
# servlet.hello.initArgs=message=I say hello world to everyone
servlet.JSSI.initArgs=SSISiteRoot=/home/robertm/WORK/apache/servlets,expires=-1000
servlet.PJSSI.initArgs=PropagateParameters=JServSessionId
servlet.PJSSI.initArgs=buffered=yes
servlet.PJSSI.initArgs=SSISiteRoot=/home/robertm/WORK/apache/servlets
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Jserv.properties:
###############################################################################
# Apache JServ Configuration
File #
###############################################################################
################################ W A R N I N G
################################
# Unlike normal Java properties, JServ configurations have some
important
# extentions:
#
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in a
# comma-separated list.
###############################################################################
#
# Execution parameters
#######################
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in your
path.
wrapper.bin=/home/robertm/WORK/ibm/jdk118/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename (not
used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32 systems
# Notes: if more than one line is supplied these will be concatenated
using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will be
# automatically evaluated to match your system requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be concatenated
using
# ":" or ";" (depending wether Unix or Win32) characters. JVM must
be
# able to find JSDK and JServ classes and any utility classes used
by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the shell
# you start the Apache from.
#
wrapper.classpath=/home/robertm/WORK/apache/mine/libexec/ApacheJServ.jar
wrapper.classpath=/home/robertm/WORK/apache/jsdk2.0/lib/jsdk.jar
wrapper.classpath=/home/robertm/WORK/apache/servlets/test/ApacheJSSI.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on Win32
systems
# An environment name with value copied from caller to Java Virtual
Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=[true|false] (boolean)
# Default: false
wrapper.env.copyall=true
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
#
# General parameters
######################
# Set the default IP address or hostname Apache JServ binds (or listens)
to.
#
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is so
# that one can have multiple instances of Apache JServ listening on
# the same port number, but different IP addresses on the same machine.
# Use bindaddress=* only if you know exactly what you are doing here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache, and
should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal network
address
# (protected by a firewall) if JServ is running on another machine than
Apache.
# Ask your network admin.
# "*" _may_ be used on boxes where some of the clients get connected
using
# "localhost"and others using another IP addr.
#
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
#
# Servlet Zones parameters
###########################
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma separated list
of String)
# Default: NONE
#zones=root,test
zones=test
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=[full path
to configFile] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
#root.properties=/home/robertm/WORK/apache/mine/conf/jserv/zone.properties
test.properties=/home/robertm/WORK/apache/mine/conf/jserv/test.properties
#
# Thread Pool parameters
#########################
# Enables or disables the use of the thread pool.
# Syntax: pool=[true|false] (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may generate
deadlocks.
# For this reason, we advise against using this code in production
environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low for
contantly
# loaded servers and should be increased depending on load bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special recycle
behavior
# is needed. Look at the "org.apache.java.recycle" package javadocs for
more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
#
# Security parameters
#####################
# Enable/disable the execution of org.apache.jserv.JServ as a servlet.
# This is disabled by default because it may give informations that
should
# be restricted.
# Note that the execution of Apache JServ as a servlet is filtered by
the web
# server modules by default so that both sides should be enabled to let
this
# service work.
# This service is useful for installation and configuration since it
gives
# feedback about the exact configurations Apache JServ is using, but it
should
# be disabled when both installation and configuration processes are
done.
# Syntax: security.selfservlet=[true|false] (boolean)
# Default: false
# WARNING: disable this in a production environment since may give
reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may handle
# simultaneously. Make sure your operating environment has enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This is a
first
# security filtering to reject possibly unsecure connections and avoid
the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you are doing
:
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
#
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]... (Comma
separated list of IP addresses)
security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we believe that
# connection restriction from all IP addresses but localhost reduces
your
# time to get Apache JServ to run. If you allow other addresses to
connect and
# you don't trust it, you should enable authentication to prevent
untrusted
# execution of your servlets. Beware: if authentication is disabled and
the
# IP address is allowed, everyone on that machine can execute your
servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
#security.secretKey=/home/robertm/WORK/apache/mine/conf/jserv/jserv.secret.key
# Length of the randomly generated challenge string (in bytes) used to
# authenticate connections. 5 is the lowest possible choice to force a
safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=21
#
# Logging parameters
####################
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable it if
fast
# execution is an issue. Note that if all log channels (see below) are
# enabled, the log may become really big since each servlet request may
# generate many Kb of log. Some log channels are mainly for debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible confusion about
# the location of this file, an absolute pathname is recommended.
#
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of Apache
# JServ.
#
# On Unix, this file must have write permissions by the owner of the JVM
# process. In other words, if you are running Apache JServ in manual
mode
# and Apache is running as user nobody, then the file must have its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute paths.
log.file=/home/robertm/WORK/apache/mine/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread running with
# minimum priority, it's of vital importance that this thread gets a
chance
# to run once in a while. If it doesn't, the log queue overflow occurs,
# usually resulting in the OutOfMemoryError.
#
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for the
logged
# message to stay in the queue, the latter defines maximum number of
# messages in the queue.
#
# If one of those conditions becomes true (age > maxage || size >
maxsize),
# the log message stating that fact is generated and the log queue is
# flushed in the separate thread.
#
# If you ever see such a message, either your system doesn't live up to
its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
#
# WARNING: Default values are lousy, you probably want to tweak them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
#log.channel.debug=true
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Httpd.conf
##
## httpd.conf -- Apache HTTP server configuration file
##
#
# Based upon the NCSA server configuration files originally by Rob
McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are
unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# /home/robertm/WORK/apache/mine/conf/srm.conf and then
/home/robertm/WORK/apache/mine/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process
as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default'
server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32),
the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerType is either inetd, or standalone. Inetd mode is only
supported on
# Unix platforms.
#
ServerType standalone
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at
<URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/home/robertm/WORK/apache/mine"
#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
#LockFile /home/robertm/WORK/apache/mine/logs/httpd.lock
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /home/robertm/WORK/apache/mine/logs/httpd.pid
#
# ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this. But if yours does (you'll know
because
# this file will be created when you run Apache) then you *must* ensure
that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /home/robertm/WORK/apache/mine/logs/httpd.scoreboard
#
# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order. The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity. The commented-out values
# below are the built-in defaults. You can have the server ignore
# these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from
the
# same client on the same connection.
#
KeepAliveTimeout 15
#
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 10
#
# Number of servers to start initially --- should be a reasonable
ballpark
# figure.
#
StartServers 5
#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150
#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems,
this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80
#
# BindAddress: You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are
used.
# Please read the file README.DSO in the Apache 1.3 distribution for
more
# details about the DSO mechanism and run `httpd -l' for the list of
already
# built-in (statically linked and thus always available) modules in your
httpd
# binary.
#
# Note: The order is which modules are loaded is important. Don't
change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule jserv_module libexec/mod_jserv.so
LoadModule mmap_static_module libexec/mod_mmap_static.so
LoadModule vhost_alias_module libexec/mod_vhost_alias.so
LoadModule env_module libexec/mod_env.so
LoadModule config_log_module libexec/mod_log_config.so
LoadModule agent_log_module libexec/mod_log_agent.so
LoadModule referer_log_module libexec/mod_log_referer.so
LoadModule mime_magic_module libexec/mod_mime_magic.so
LoadModule mime_module libexec/mod_mime.so
LoadModule negotiation_module libexec/mod_negotiation.so
LoadModule status_module libexec/mod_status.so
LoadModule info_module libexec/mod_info.so
LoadModule includes_module libexec/mod_include.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule autoindex_module libexec/mod_autoindex.so
LoadModule dir_module libexec/mod_dir.so
LoadModule cgi_module libexec/mod_cgi.so
LoadModule asis_module libexec/mod_asis.so
LoadModule imap_module libexec/mod_imap.so
LoadModule action_module libexec/mod_actions.so
LoadModule speling_module libexec/mod_speling.so
LoadModule userdir_module libexec/mod_userdir.so
LoadModule alias_module libexec/mod_alias.so
LoadModule rewrite_module libexec/mod_rewrite.so
LoadModule access_module libexec/mod_access.so
LoadModule auth_module libexec/mod_auth.so
LoadModule anon_auth_module libexec/mod_auth_anon.so
LoadModule dbm_auth_module libexec/mod_auth_dbm.so
LoadModule db_auth_module libexec/mod_auth_db.so
LoadModule digest_module libexec/mod_digest.so
LoadModule proxy_module libexec/libproxy.so
LoadModule cern_meta_module libexec/mod_cern_meta.so
LoadModule expires_module libexec/mod_expires.so
LoadModule headers_module libexec/mod_headers.so
LoadModule usertrack_module libexec/mod_usertrack.so
LoadModule example_module libexec/mod_example.so
LoadModule unique_id_module libexec/mod_unique_id.so
LoadModule setenvif_module libexec/mod_setenvif.so
#LoadModule allowdev_module libexec/mod_allowdev.so
#LoadModule cookie_auth_module libexec/mod_auth_cookie.so
#LoadModule cookie_file_access_module libexec/mod_auth_cookie_file.so
#LoadModule external_auth_module libexec/mod_auth_external.so
#LoadModule inst_auth_module libexec/mod_auth_inst.so
#LoadModule auth_system_module libexec/mod_auth_system.so
#LoadModule eaccess_module libexec/mod_eaccess.so
#LoadModule bandwidth_module libexec/mod_bandwidth.so
#LoadModule cache_module libexec/libcache.so
#LoadModule urlcount_module libexec/mod_urlcount.so
#LoadModule disallow_id_module libexec/mod_disallow_id.so
#LoadModule lock_module libexec/mod_lock.so
#LoadModule peephole_module libexec/mod_peephole.so
#LoadModule put_module libexec/mod_put.so
#LoadModule qs2ssi_module libexec/mod_qs2ssi.so
#LoadModule session_module libexec/mod_session.so
#LoadModule fastcgi_module libexec/mod_fastcgi.so
#LoadModule cvs_module libexec/mod_cvs.so
#LoadModule roaming_module libexec/mod_roaming.so
#LoadModule w3c_ip_forwarding_module libexec/mod_ip_forwarding.so
#LoadModule macro_module libexec/mod_macro.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
AddModule mod_jserv.c
AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_db.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
AddModule mod_example.c
AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_allowdev.c
#AddModule mod_auth_cookie.c
#AddModule mod_auth_cookie_file.c
#AddModule mod_auth_external.c
#AddModule mod_auth_inst.c
#AddModule mod_auth_system.c
#AddModule mod_eaccess.c
#AddModule mod_bandwidth.c
#AddModule mod_cache.c
#AddModule mod_urlcount.c
#AddModule mod_disallow_id.c
#AddModule mod_lock.c
#AddModule mod_peephole.c
#AddModule mod_put.c
#AddModule mod_qs2ssi.c
#AddModule mod_session.c
#AddModule mod_fastcgi.c
#AddModule mod_cvs.c
#AddModule mod_roaming.c
#AddModule mod_ip_forwarding.c
#AddModule mod_macro.c
#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
ExtendedStatus On
### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#
#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 8080
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
#
User nobody
Group nobody
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin [EMAIL PROTECTED]
#
# ServerName allows you to set a host name which is sent back to clients
for
# your server if it's different than the one the program would get
(i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name
you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address
here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
#ServerName tarasis.pfe
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
#DocumentRoot "/home/robertm/WORK/apache/mine/htdocs"
DocumentRoot "/home/robertm/WORK/apache/servlets"
#
# Each directory to which Apache has access, can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
Options None
AllowOverride All
</Directory>
#<Directory "/home/robertm/WORK/apache/servlets/test/">
# Options All MultiViews
# AllowOverride All
# Order allow,deny
# Allow from all
#</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
#<Directory "/home/robertm/WORK/apache/mine/htdocs">
<Directory "/home/robertm/WORK/apache/servlets">
#
# This may also be "None", "All", or any combination of "Indexes",
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# Options Indexes FollowSymLinks MultiViews
Options Indexes FollowSymLinks
#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options",
"FileInfo",
# "AuthConfig", and "Limit"
#
## AllowOverride None
AllowOverride All
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# UserDir: The name of the directory which is appended onto a user's
home
# directory if a ~user request is received.
#
UserDir public_html
#UserDir WORK/apache/servlets
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
#
DirectoryIndex index.html
#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with
each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs
#
# UseCanonicalName: (new for 1.3) With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a URL that refers
back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On
#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /home/robertm/WORK/apache/mine/conf/mime.types
#
# DefaultType is the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use various hints from
the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule>
container.
# This means that the MIMEMagicFile directive will only be processed if
the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile /home/robertm/WORK/apache/mine/conf/magic
</IfModule>
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /home/robertm/WORK/apache/mine/logs/error_log
#
# LogLevel: Control the number of messages logged to the error_log.
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /home/robertm/WORK/apache/mine/logs/access_log common
#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /home/robertm/WORK/apache/mine/logs/referer_log referer
#CustomLog /home/robertm/WORK/apache/mine/logs/agent_log agent
#
# If you prefer a single logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /home/robertm/WORK/apache/mine/logs/access_log combined
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory
listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On
#
# Aliases: Add here as many aliases as you need (with no limit). The
format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in
this
# example, only "/icons/"..
#
Alias /icons/ "/home/robertm/WORK/apache/mine/icons/"
<Directory "/home/robertm/WORK/apache/mine/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the
client.
# The same rules about trailing "/" apply to ScriptAlias directives as
to
# Alias.
#
ScriptAlias /cgi-bin/ "/home/robertm/WORK/apache/servlets/cgi-bin/"
#
#
# "/home/robertm/WORK/apache/mine/cgi-bin" should be changed to whatever
your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/home/robertm/WORK/apache/servlets/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
#
# Redirect allows you to tell clients about documents which used to
exist in
# your server's namespace, but do not anymore. This allows you to tell
the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#
#
# Directives controlling the display of server-generated directory
listings.
#
#
# FancyIndexing is whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
#
# The server will first look for name.html and include it if found.
# If name.html doesn't exist, the server will then look for name.txt
# and include it as plaintext if found.
#
ReadmeName README
HeaderName HEADER
#
# IndexIgnore is a set of filenames which directory indexing should
ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have
nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
#
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for it's country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) -Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage it .it
AddLanguage pt .pt
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
LanguagePriority en da nl et fr de el it pt ltz ca es sv
#
# AddType allows you to tweak mime.types without actually editing it, or
to
# make certain files to be certain types.
#
# For example, the PHP 3.x module (not part of the Apache distribution -
see
# http://www.php.net) will typically use:
#
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
#
# And for PHP 4.x, use:
#
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
#
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the
server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
#AddHandler cgi-script .cgi
#
# To use server-parsed HTML files
#
#AddType text/html .shtml
#AddHandler server-parsed .shtml
#
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis
#
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map
#
# To enable type maps, you might want to use
#
#AddHandler type-map var
#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web
#
#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta
#
# Customizable error response (Apache style)
# these come in three flavors
#
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the (") marks it as text, it does not get output
#
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using
server-side-includes.
#
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will *not* be available to such a script.
#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers
that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
#
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# Allow server status reports, with the URL of
http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from tarasis.pfe localhost
</Location>
#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from tarasis.pfe localhost
</Location>
## because of problems reading from the jserv.conf file the following
## is taken from it
<Location /jserv/>
SetHandler jserv-status
AllowOverride All
SetHandler jserv-status
AllowOverride All
Order deny,allow
Deny from all
Allow from tarasis.pfe localhost
</Location>
Include /home/robertm/WORK/apache/mine/conf/jserv/jserv.conf
#ApJServAction .jhtml /test/JSSI
#ApJServAction .pjhtml /test/PJSSI
#
# There have been reports of people trying to abuse an old bug from
pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a
logging
# script on phf.apache.org. Or, you can record them yourself, using the
script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Directory>
#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via:
headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On
#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "/home/robertm/WORK/apache/mine/proxy"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on
your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
#
#<VirtualHost ip.address.of.host.some_domain.com>
# ServerAdmin [EMAIL PROTECTED]
# DocumentRoot /www/docs/host.some_domain.com
# ServerName host.some_domain.com
# ErrorLog logs/host.some_domain.com-error_log
# CustomLog logs/host.some_domain.com-access_log common
#</VirtualHost>
#<VirtualHost _default_:*>
#</VirtualHost>
------------------------------------------------------------
To subscribe: [EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Problems?: [EMAIL PROTECTED]
