Hi Doris;

It sounds like you & I both learned about peaks/ valleys, highs / lows & 
pitfalls of computers & Jaws the same way.  LOL  I do agree with you about 
how great lists' like this one are!  Both Rick, & David have been extremely 
important to my learning the computer / Jaws by having the most inner 
self-fortitude of maintaining the lists' but, most of all the unselfishness 
of all the list members in their willingness to share with others!  A big 
hearty thank you to all the list members, moderators, & owners.  Take care.
Mike

  ----- Original Message ----- 
  From: Doris and Chris
  To: jaws-users-list@jaws-users.com
  Sent: Monday, March 07, 2011 2:15 PM
  Subject: Re: [JAWS-Users] Labeling Graphics Manually - Was: Re: CCleaner 
not reading check boxes


  you are very welcome. *smile* A keeper in my own local packrat
  archive, too. <g>

  These lists are so neat because we help and learn from one another. i
  never took a formal class for jaws but know all I know from either
  experimentation or asking on some of these lists or just collecting
  instructional posts that I thought relevant.

  Warm Regards,

  Doris

  At 04:58 PM 3/7/2011, you wrote:
  >Hi Doris;
  >
  >Thank you very, very much for the easy to follow steps & the graphics
  >labeling lesson.  Definitely a keeper.  Thanks again, take care.
  >Mike
  >
  >   ----- Original Message -----
  >   From: Doris and Chris
  >   To: jaws-users-list@jaws-users.com
  >   Sent: Monday, March 07, 2011 1:25 PM
  >   Subject: [JAWS-Users] Labeling Graphics Manually - Was: Re: CCleaner 
not
  >reading check boxes
  >
  >
  >   1. do
  >
  >   jawskey+v
  >
  >   to get into the temporary verbosity settings
  >
  >   2. hit the letter "g" until you land on "graphics"
  >
  >   hit your spacebar to cycle thru the different settings for graphics
  >   until you hear "all" then hit enter.
  >
  >   3. in the selection multiselect, find an option whose setting you are
  >   sure of (i.e. "checked or "unchecked')
  >
  >   4. route jaws to pc and put the jaws cursor on the graphics number
  >
  >   5. do a
  >
  >   jawskey+g
  >
  >   to invoke the grapics labeler (manual)
  >
  >   6. type in the graphics label you want spoken, i.e. "checked" or
  >"unchecked"
  >
  >   7. go back to the pc cursor and hit your spacebar on the selection
  >   you just labled. the checkbox status will be toggled to the opposite
  >   of what you just labled. repeat steps  4. to 6. above to lable the
  >   graphic status.
  >
  >   I have to do the same in some other programs like autopatcher or the
  >   old tweak-ui on 9x or 2k machines and knowning how to do this is 
helpful.
  >
  >   hth
  >
  >   Doris
  >
  >
  >
  >
  >   At 04:07 PM 3/7/2011, you wrote:
  >   >Hi Doris;
  >   >
  >   >I have to press the spacebar first, which either checks or unchecks 
the
  >box,
  >   >then do a say line, then spacebar to recheck or reuncheck the box
  >depending
  >   >on how I want it.  I tried the Auto Graphics Labeler & that didn't 
help.
  >   >How did you go about labeling these as graphics?  I haven't done much
  >   >graphics labeling so easy to follow steps would be nice.  All help 
would
  >be
  >   >graciously accepted.  Thanks much, take care.
  >   >Mike
  >   >
  >   >   ----- Original Message -----
  >   >   From: Doris and Chris
  >   >   To: jaws-users-list@jaws-users.com
  >   >   Sent: Monday, March 07, 2011 12:10 PM
  >   >   Subject: Re: [JAWS-Users] CCleaner not reading check boxes
  >   >
  >   >
  >   >   you're lucky to have a sayline tell you the state of the 
checkboxes.
  >   >   I had to label mine as graphics here and have to use the jaws 
cursor
  >   >   to see the status of the check boxes.
  >   >
  >   >   hth
  >   >
  >   >   Doris
  >   >
  >   >   At 02:55 PM 3/7/2011, you wrote:
  >   >   >Hi All;
  >   >   >
  >   >   >When in the CCleaner Tree View, is there any way to make Jaws 
read
  >   >whether
  >   >   >an item / option is checked or unchecked while arrowing down this
  >list?
  >   >   >Currently I have to, press the spacebar and then , Jaws key + up
  >arrow
  >   >   >keystroke, for say line, to hear if the box is checked or not.  I
  >would
  >   >like
  >   >   >to be able to just arrow down the list and have Jaws read if the
  >boxes
  >   >are
  >   >   >checked or not.  I have played with the Windows State options in 
the
  >   >   >CCleaner configuration manager with no success.  If anyone has a 
fix
  >for
  >   >   >this I would really like to learn about it!  All advice or help 
will
  >be
  >   >   >greatly appreciated.  Thanks much.  Take care.
  >   >   >Mike
  >   >   >For answers to frequently asked questions about this list visit:
  >   >   >http://www.jaws-users.com/help/
  >   >   >Send any questions regarding list management to:
  >   >   >jaws-users-list-ow...@jaws-users.com
  >   >
  >   >
  >   >
  >   >   For answers to frequently asked questions about this list visit:
  >   >   http://www.jaws-users.com/help/
  >   >   Send any questions regarding list management to:
  >   >   jaws-users-list-ow...@jaws-users.com
  >   >For answers to frequently asked questions about this list visit:
  >   >http://www.jaws-users.com/help/
  >   >Send any questions regarding list management to:
  >   >jaws-users-list-ow...@jaws-users.com
  >
  >
  >
  >   For answers to frequently asked questions about this list visit:
  >   http://www.jaws-users.com/help/
  >   Send any questions regarding list management to:
  >   jaws-users-list-ow...@jaws-users.com
  >For answers to frequently asked questions about this list visit:
  >http://www.jaws-users.com/help/
  >Send any questions regarding list management to:
  >jaws-users-list-ow...@jaws-users.com



  For answers to frequently asked questions about this list visit:
  http://www.jaws-users.com/help/
  Send any questions regarding list management to:
  jaws-users-list-ow...@jaws-users.com 
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
jaws-users-list-ow...@jaws-users.com

Reply via email to