Hi Rich, Also, when in a Word document, try the keystroke Control, Shift, + 8 on the number row. This temporarily stops formatting from being spoken.
Now, try this for your Say All problem; 1. Insert + V, for quick settings. 2. Arrow down once or twice to get out of the Search edit box. Now, tap the letter S, until you come to SayAll Options. 3. Arrow down to, Capitalization and make sure this says, ignore. If it doesn't, press the spacebar until it does & press enter to save the changes & close. Hope this helps. Take care. Mike ----- Original Message ----- From: rich To: jaws-users-list@jaws-users.com Sent: Saturday, March 03, 2012 9:29 AM Subject: Re: [JAWS-Users] Microsoft word question. Turning Off Tab Control Thanks so much! This worked. Do you have any suggestions on to change the way JAWS speaks any word with a capital letter with a higher pitch? Again, this only happens when I am readinga say all instead of one line at a time. Rich ----- Original Message ----- From: "Mike & Barbara" <mb69ma...@charter.net> To: <jaws-users-list@jaws-users.com> Sent: Saturday, March 03, 2012 11:41 AM Subject: Re: [JAWS-Users] Microsoft word question. Turning Off Tab Control > Hi Rich, > > Below are steps on turning the Tab Control off through Speech & Sound > Schemes. > > 1. Press Insert / Jaws key + 6, on the number row above the main keyboare > or, press Insert / Jaws key + F2, to open the Jaws Manager, Press the > letter > S, > until you hear Jaws read Settings Center, & press enter. > 2. Press control, shift, + D, for the Settings Center Default All > Applications. > 3. Arrow down to, Speech & Sound Schemes, & press right arrow to open. > 4. Arrow down to Modify Schemes, & press the spacebar, not enter. > Pressing > enter will take you out of the Settings Center. > 5. Tab 2 times to, edit selected scheme button, & press the spacebar. > 6. You will hear Modify Schemes... General page Scheme Description, press > shift + Tab 1 time, to be on theGenerl tab. > 7. Right Arrow 1 time to the Control Type Tab. > 8. Tab 1 time to, List View, Controls Behavior..., press the letter T, to > take you to Tab Control. > 9. Tab 1 time to a group of radio buttons, arrow down to, ignore. You can > also invoke the Alt + I keystroke, the keystroke for ignore. > 10. Tab to Okay, press the spacebar, tab to Save Selected Scheme Button, > press the spacebar, tab to okay, press the spacebar, now tab to okay 1 > more > time, > press the spacebar, & you are done. > > Hope this helps. Take care. > Mike > > > > ----- Original Message ----- > From: rich > To: jaws-users-list@jaws-users.com > Sent: Friday, March 02, 2012 7:12 PM > Subject: Re: [JAWS-Users] Microsoft word question. > > > Thanks, but, when I checked, the "tab" was unchecked. > > Rich > ----- Original Message ----- > From: "Mike & Barbara" <mb69ma...@charter.net> > To: <jaws-users-list@jaws-users.com> > Sent: Friday, March 02, 2012 9:30 PM > Subject: Re: [JAWS-Users] Microsoft word question. > > > > Hi Rich, > > > > Here are 2 explanations on how to do this. > > #1: > > > > 1. While in Word, press Insert / Jaws key + V, for quick settings. > > 2. Arrow down a couple of times to the tree view > > 3. Press the letterT, until you get to, Tab Measurement Indication, > press > > the spacebar to uncheck this box, & press enter to save the changes & > > close. > > > > #2: > > > > 1. While in Word, press Insert / Jaws key + V, for quick settings. > > 2. Type Tab, into the Search box, & wait for the list to populate. > > 3. Arrow down to, Tab Measurement Indication, press the spacebar to > > uncheck > > this box, & press enter to save the changes & close. > > > > If someone has another way I would be interested in learning it as > well. > > Hope this helps. Take care. > > Mike > > > > > > ----- Original Message ----- > > From: rich > > To: jaws-users-list@jaws-users.com > > Sent: Friday, March 02, 2012 3:13 PM > > Subject: [JAWS-Users] Microsoft word question. > > > > > > Hi all; > > I have XP and13.0. > > I just updated to 13.0 and when I am in Microsoft word, JAWS reads > tabs, > > for example, when I am at the top of the page, I hear 1 inch. > > or, before a certain line I hear 1.5 inches. > > I am not sure where to turn this off. > > I can not get JAWS to announce the - symbol. > > Precise directions are appreciated. > > Oh, lately, I have sent messages to JAWS and they would not appear in > my > > in box. So please, could someone reply. > > This would let me know if the message is going through. > > Any suggestion on the "word" and, "sending" issue is much appreciated. > > > > Rich > > For answers to frequently asked questions about this list visit: > > http://www.jaws-users.com/help/ > > For answers to frequently asked questions about this list visit: > > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
