smile, we all goof, especally me, i get tired and forget, or misstype
something or even forget a word and fa-shaw its all gone to pieces
take care,
I...
. Moderator, Blind Access Help.
. need to find information on something not covered by a list? (that you
know of), contact me off list and I'll see what i can find for you:
inthane...@roadrunner.com
. Proprietor: Inthane's Grab Bag
for blind computer users and Programmers!
http://grabbag.alacorncomputer.com
----- Original Message -----
From: "Mike B." <mb69ma...@charter.net>
To: <jaws-users-list@jaws-users.com>
Sent: Tuesday, July 03, 2012 3:31 PM
Subject: Re: [JAWS-Users] A PDF question
Hi Inthane,
I misspoke. What I should have said was that Openbook would still work &
files could still be accessed with the Freedom Import Printer but, a
scanner
would have to be hooked up in order to scan an outside document. Sorry for
the totally wrong post. Thank you for straightening me out. After reading
my own reply I see how misinforming it was!
Take care.
Mike
This email was sent from my iLazyBoy.
----- Original Message -----
From: inthaneelf
To: jaws-users-list@jaws-users.com
Sent: Tuesday, July 03, 2012 2:19 PM
Subject: Re: [JAWS-Users] A PDF question
HUH? where do you find this, my open book 8 works just fine weather i
have
a
scanner hooked to the computer or not!
never had it even ask for a scanner until i hit the scan key combo, then
it
wants to know where its scanner is! but no hassel until then
laters,
Inthane
. Moderator, Blind Access Help.
. need to find information on something not covered by a list? (that you
know of), contact me off list and I'll see what i can find for you:
inthane...@roadrunner.com
. Proprietor: Inthane's Grab Bag
for blind computer users and Programmers!
http://grabbag.alacorncomputer.com
----- Original Message -----
From: "Rich" <rcha...@bellsouth.net>
To: <jaws-users-list@jaws-users.com>
Sent: Sunday, July 01, 2012 4:45 AM
Subject: Re: [JAWS-Users] A PDF question
> What would happen if you installed the original printer to the second
> computer, then the software, then put the printer back to the first
> computer?
> Would the software still work on the second computer, without the
printer?
>
> Rich
> ----- Original Message -----
> From: "Mike B." <mb69ma...@charter.net>
> To: <jaws-users-list@jaws-users.com>
> Sent: Saturday, June 30, 2012 9:20 PM
> Subject: Re: [JAWS-Users] A PDF question
>
>
>> Hi Vicky,
>>
>> You could install it but, it wouldn't work unless you hooked a scanner
up
>> to
>> it. There are some rather inexpensive good stand alone scanners out
>> there.
>> Once you have the scanner installed, you would then go into the
Openbook
>> menues & assign the scanner to be used to the program. The Canon LIDE
>> series is 1 brand that comes to mind. Take care.
>> Mike
>> This email was sent from my iLazyBoy.
>>
>> ----- Original Message -----
>> From: Vicky Vaughan
>> To: jaws-users-list@jaws-users.com
>> Sent: Saturday, June 30, 2012 5:45 PM
>> Subject: Re: [JAWS-Users] A PDF question
>>
>>
>> Hi Mike, Can I install open Book on my second computer, where there
is
>> no
>> scanner?
>> I may be mistaken in thinking, that the installment program would
look
>> for
>> the presence of a scanner.
>>
>> Thanks, Vicky
>>
>>
>> ----- Original Message -----
>> From: "Mike B." <mb69ma...@charter.net>
>> To: <jaws-users-list@jaws-users.com>
>> Sent: Saturday, June 30, 2012 8:11 PM
>> Subject: Re: [JAWS-Users] A PDF question
>>
>>
>> > Hi Again Vicky,
>> >
>> > How about installing Openbook on your main computer! You are
allowed
>> to
>> > have it on more than 1 computer, providing the other computer is
also
>> > yours.
>> > Hope this helps a little. Take care.
>> > Mike
>> > This email was sent from my iLazyBoy.
>> >
>> > ----- Original Message -----
>> > From: Vicky Vaughan
>> > To: jaws-users-list@jaws-users.com
>> > Sent: Saturday, June 30, 2012 11:53 AM
>> > Subject: [JAWS-Users] A PDF question
>> >
>> >
>> > Hi, I just baut and downloaded a book and 3 documents, only to
find
>> when
>> > I
>> > unpact them, that they were in PDF format.
>> >
>> > I have checked ansers that have talked about how to read such a
>> document
>> > but I have an aditional problem.
>> > My file is on my main computer and my OpenBook software is on my
>> other
>> > computer and the file will not let me copy it on to a disk to
transfer
>> it.
>> >
>> > Is there any way my Jaws 13, with convient OCR can handle reading
an
>> > entire book?
>> >
>> > Many thanks for any suggestions! Vicky
>> > For answers to frequently asked questions about this list visit:
>> > http://www.jaws-users.com/help/
>> > For answers to frequently asked questions about this list visit:
>> > http://www.jaws-users.com/help/
>>
>>
>> For answers to frequently asked questions about this list visit:
>> http://www.jaws-users.com/help/
>> For answers to frequently asked questions about this list visit:
>> http://www.jaws-users.com/help/
>
>
> For answers to frequently asked questions about this list visit:
> http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
