Yes, I posted as much here about 2 years ago I think. The command jrf -H4 is what you need. then set the defaults to create J4 files, not JR files.
Jim > -----Original Message----- > From: jbase@googlegroups.com [mailto:jbase@googlegroups.com] On Behalf > Of adrian > Sent: Friday, August 19, 2011 6:18 AM > To: jBASE > Subject: Re: jbase problems show-items-locks > > We have been informed by Temenos to change the JR files which are used > for migration to J4 because there is a performance problem with the JR > files type. The throughput of the JR we have found are much slower > compared to the J4 files and there is also a problem with exclusive > reads with JR. (SP8 and SP11 have this problem). > Any have a formula to convert JR files to J4? > AA > > On Aug 17, 9:35 am, Jim Idle <j...@temporal-wave.com> wrote: > > Actually, the locking behavior you suggest will only be the case so > > long as the select is in hash order and not a SSELECT. A SSELECT will > > cause different batch processes to access the same groups > > simultaneously almost immediately, with a probability related to the > > number of groups (assuming well sized) and the number of batch > processes. > > > > Also don't forget that batch inputs will be processed better if you > > make the files read only and do not delete anything until a cleanup > at > > the end (of all processing). Knowing that there is no problem with > > read/update locking, J4 files will not take the locks (unless someone > > changed this in jBASE 5 for instance). Also, you should look in to > > FASTSCAN as application programmers. > > > > Jim > > > > > > > > > -----Original Message----- > > > From: jbase@googlegroups.com [mailto:jbase@googlegroups.com] On > > > Behalf Of John Watson > > > Sent: Wednesday, August 17, 2011 2:59 AM > > > To: jBASE > > > Subject: Re: jbase problems show-items-locks > > > > > Hi Pawel, > > > > > You have said > > > > > 'In our case high 'lock collision' ratio on group locks is killing > > > performance. JOB.LIST.x files suffer from multiple, concurrent > > > 'SELECTs SAMPLE' (~ full scan) and multiple, concurrent > READUs/WRITEs' > > > > > I'm not sure what release you use at the moment but I would only > > > expect to see the above problem towards the end of a job when a > high > > > number of agents are being used - at the start of the job a list is > > > created and each agent takes 1/number of agents * total number of > > > records as the agent work load - there should be no duplication of > > > records across agents at this initial stage (but of course there > > > could be a duplication of groups) > > > > > When this workload is consumed a full select will take place on the > > > JOB.LIST file and hence we can have more issues with collisions on > > > groups, records processed by other agents etc. > > > > > Are you sure that the problem is actually with the JOB.LIST table > > > and not locks on BATCH.STATUS or BATCH - there have been problems > in > > > this area in much older releases and they should now be addressed. > > > > > If the issue is with group locks on the JOB.LIST file and the > > > overhead really is substantial then perhaps there is a logical > > > argument to oversize the file to minimise the number of records in > a > > > group - to be worthwhile the increase in select time would have to > > > outweigh the time lost to group locks. > > > > > Cheers, > > > > > John. > > > > > -- > > > Please read the posting guidelines at: > > >http://groups.google.com/group/jBASE/web/Posting%20Guidelines > > > > > IMPORTANT: Type T24: at the start of the subject line for questions > > > specific to Globus/T24 > > > > > To post, send email to jBASE@googlegroups.com To unsubscribe, send > > >email to jbase-unsubscr...@googlegroups.com > > > For more options, visit this group at > > >http://groups.google.com/group/jBASE?hl=en- Hide quoted text - > > > > - Show quoted text - > > -- > Please read the posting guidelines at: > http://groups.google.com/group/jBASE/web/Posting%20Guidelines > > IMPORTANT: Type T24: at the start of the subject line for questions > specific to Globus/T24 > > To post, send email to jBASE@googlegroups.com To unsubscribe, send > email to jbase-unsubscr...@googlegroups.com > For more options, visit this group at > http://groups.google.com/group/jBASE?hl=en -- Please read the posting guidelines at: http://groups.google.com/group/jBASE/web/Posting%20Guidelines IMPORTANT: Type T24: at the start of the subject line for questions specific to Globus/T24 To post, send email to jBASE@googlegroups.com To unsubscribe, send email to jbase-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/jBASE?hl=en