hahahahahahahahahaheheheheheheheheheheh, I see what the trouble is, you
need to log on to the drive a: and then type evmove c: a:
you'll get your jfw key moved back to the floppy and no rude bad command
error messages.
----------
> From: Chipmunks <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Problems Moving Authorization key
> Date: Thursday, April 01, 1999 8:27 PM
>
> Hi, Listers,
>
> After all the recent talk and horror stories about problems moving
>the
> authorization keys, I ran into a problem there myself.
>
> I tried following instructions in the everlock faq that came with JFW to
> move the key from my hard drive back to the authorization disk (to run a
> defrag) on the hd by typing
>
> c:\jfw32\evmove c: a: /b
>
> from the DOS prompt.
>
> this would not move the key, however. the error message I got was
>
> "bad command or file name."
>
> After that, I also tried the "winmove" command, but that informed me it
had
> found no authorization on my hard drive.
>
> Fortuantely, the authorization is still in place and Sharky is talking.
> However, I can't seem to move the key back to the authorization disk and
> don't dare running any program that could shoot the key.
>
> Can I trust the authorization manager to move my key back to the
> hathorization disk? I vaguely remember reading about problems with that.
>
> I am running version 3.20.09 of JFW, that is I installed no patch for.it
as
> I like and need a feature with the passwords that a later patch killed.
>
> I hope this isn't considered off topic. I am hoping to hear from you guys
> out there. any advice is appreciated.
>
> Ciao,
>
> Doris
>
> Chip & Dale ;-)
>
> [EMAIL PROTECTED]
>
> -
> Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
