Hi Bruce:
Yes that will work, but loosing the rate so offen is even more annoying.
Thanks,
George Marshall
-----Original Message-----
From: Bruce Richman <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Monday, January 18, 1999 5:20 PM
Subject: Re: Focus and rate change problem
>Hi George. Yes, this is a pain. I have the same issue. Here's what I do:
>
>1. Hit the Windows95 key located between the Alt and control keysand the
>letter m at the same time. My PC says "desktop".
>2. Now hit the tab key 4 times. It will say "not selected my computer".
>From here, you should be able to access anything on your desktop.
>
>Bruce
>-----Original Message-----
>From: George Marshall <[EMAIL PROTECTED]>
>To: jfw forum <[EMAIL PROTECTED]>
>Date: Monday, January 18, 1999 2:11 PM
>Subject: Focus and rate change problem
>
>
>>I am using JFW 3.2.019 on a 233 mhz with 80 meg of memory and a AccentPC
>>synthesizer. I have a couple of problems:
>>
>>1. The speech synthesizer looses the rate of speech quite offen and I
have
>>to hit a key to restore the rate. I am using the latest default scripts
>>from the JFW list. This is quite annoying sense I use Outlook express.
>>
>>2. When I first boot up the computer, the focus is on "my computer" and
>the
>>cursor will not move. To move the cursor off "My computer", you must
route
>>jaws to PC, left click then return to PC cursor. This will allow you to
>>start moving the cursor.
>>
>>I am providing my video card information below:
>>
>>Manufacturer: Genoa system
>>Card: Phantom 3D/DX
>>Chip type: virge/dx/gx rev b
>>Dac type: internal
>>Memory: 4mb
>>Features: DirectDraw(tm)
>>Software version: 4.0
>>Current files: S3_3.DRV, *VDD, *VFLATD, S3VDD2.VXD, S3_32VDLL
>>Refresh rate: optimal
>>Colors: 256
>>640 x 480
>>
>>-
>>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
>>
>
>-
>Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
-
Visit the jfw ml web page: http://yoyo.cc.monash.edu.au/~nallan/jfw
