It seems to me if that happens, you would get an error message.  I don't
have any lines that long in my config.sys, and I always worked my
config.sys with a text editor that did not have any word wrap.
At 09:26 AM 8/29/99 +0100, you wrote:
>Hi Walter,
>
>you haven't seen my file!  there are  times in this where it takes up two
>lines for one setting of the path to a particular program so you may need
>to turn on word rap!  this is the safest way of editing the file for me
>anyway  pluss if you are using windows 98's note pad its turned on anyway i
>think!
>!  
>
>Regards Chris Cant..
>
>   At 13:13 28/08/99 -0500, you wrote:
>>I would not turn word wrap on for editing a config.sys file.  You don't
>>want to wrap any lines.
>>At 05:44 PM 8/28/99 +0100, you wrote:
>>>I should open it with note pad!  this should do it!  How ever if i was you
>>>i'd open note pad first and type in the name of the file that you want
>>>opening this is better than opening it like that in windows explorer, also
>>>make sure the window is maximized and that word rap is on!
>>>
>>>     
>>>
>>>Regards Chris Cant..
>>>
>>>At 09:04 28/08/99 -0700, you wrote:
>>>>when I tried to open config.sys, jaws asked me what program I'd like to
>open
>>>>the file in to, since I didn't know the answer, so I didn't open.  What
>>>>program should I pick up?
>>>>----- Original Message -----
>>>>From: Flor Lynch <[EMAIL PROTECTED]>
>>>>To: <[EMAIL PROTECTED]>
>>>>Sent: Saturday, August 28, 1999 6:26 AM
>>>>Subject: Re: numpad off
>>>>
>>>>
>>>>> My apologies for incorrect syntax.  It should have been NULLOCK=OFF
>>>>> ----- Original Message -----
>>>>> From: Harry Bassler <[EMAIL PROTECTED]>
>>>>> To: Flor Lynch <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
>>>>> Sent: Saturday, August 28, 1999 12:53 PM
>>>>> Subject: Re: numpad off
>>>>>
>>>>>
>>>>> :
>>>>> : Hello Flor,
>>>>> : Your directive of NumlockOff put in the file
>>>>> : config.sys
>>>>> : does not achieve the desired objective.
>>>>> : I just inserted that line at the top of my config & rebooted.
>>>>> : The numlock was still On.
>>>>> :
>>>>> : Someone awhile ago instructed me that the line:
>>>>> : numlock=off
>>>>> : put at the bottom of the config would do the trick & I have confirmed
>>>>> this.
>>>>> : However, & this is important,
>>>>> : the line must go at the bottom & be followed by a blank line.
>>>>> :
>>>>> : I forget who inquired about this yesterday or I would CC this post.
>>>>> :
>>>>> : Regards,
>>>>> : JHarry
>>>>> :
>>>>> : ----- Original Message -----
>>>>> : From: Flor Lynch <[EMAIL PROTECTED]>
>>>>> : To: <[EMAIL PROTECTED]>
>>>>> : Sent: Thursday, August 26, 1999 9:43 PM
>>>>> : Subject: Re: numpad off
>>>>> :
>>>>> :
>>>>> : You can turn  the numpad off temporarily or permanently.  To turn it
>off
>>>>> : temporarily, press the  top leftmost key on the numpad - the numlock
>>>>> toggle
>>>>> : on/off key.  To
>>>>> : turn numlock off permanently, if you wish, go into your config.sys
file
>>>>> and
>>>>> : type in NumlockOff (case sensitive)
>>>>> : ----- Original Message -----
>>>>> : From: Soniya Patel <[EMAIL PROTECTED]>
>>>>> : To: <[EMAIL PROTECTED]>
>>>>> : Sent: Friday, August 27, 1999 1:25 AM
>>>>> : Subject: numpad off
>>>>> :
>>>>> :
>>>>> : : Could someone please send me directions as to how to turn the numpad
>>>>ff
>>>>> : when
>>>>> : : you boot up the computer?  I can't seem to find it.  Thanks.
>>>>> : :
>>>>> : :
>>>>> : : -
>>>>> : : Visit the jfw ml web page: http://jfw.cjb.net
>>>>> : :
>>>>> : :
>>>>> :
>>>>> :
>>>>> : -
>>>>> : Visit the jfw ml web page: http://jfw.cjb.net
>>>>> :
>>>>> : -
>>>>> : Visit the jfw ml web page: http://jfw.cjb.net
>>>>> :
>>>>> :
>>>>>
>>>>> -
>>>>> Visit the jfw ml web page: http://jfw.cjb.net
>>>>>
>>>>
>>>>-
>>>>Visit the jfw ml web page: http://jfw.cjb.net
>>>>
>>>>
>>>Chris Cant 
>>>
>>>of Second sight Picture framing service,
>>>
>>>order your Picture frames from me!
>>> voice 44 01482 564199
>>>
>>>ICQ number 22635936
>>>-
>>>Visit the jfw ml web page: http://jfw.cjb.net
>>>
>>>
>>Walter
>>-
>>Visit the jfw ml web page: http://jfw.cjb.net
>>
>>
>Chris Cant 
>
>of Second sight Picture framing service,
>
>order your Picture frames from me!
> voice 44 01482 564199
>
>ICQ number 22635936
>-
>Visit the jfw ml web page: http://jfw.cjb.net
>
>
Walter

-
Visit the jfw ml web page: http://jfw.cjb.net

Reply via email to