Hi Kana, On j-boxes you need the same - there is nothing special about it - so
- be sure you have your statics in routing-options - use multihop in group/neighbor stanza - use local-address in group/neighbor regards piotr marecki ----- Original Message ----- From: "Kanagaraj Krishna" <[EMAIL PROTECTED]> To: <juniper-nsp@puck.nether.net> Sent: Friday, March 16, 2007 2:10 PM Subject: Re: [j-nsp] BGP load balancing on 2 links (same ISP) > Hi, > Which is the best way to get BGP load balancing up and running with the > same provider on a m7i using loopback IP? I've realised quite a number > enquiries on this matter on most forum. Can it be done? In cisco usually > the things needed are: > > - 2 static routes pointing to the providers loopback IP > - ebgp multihop config > - update source loopback > > Regards, > Kana > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp