Fahad, Did you ever get an answer to your question? Check this out:
http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-servic es/html/lsq-config20.html Could you try changing this: > class-of-service{ [..] > interfaces { > e1-0/0/0 { > scheduler-map CoS-MLPPP; > } > e1-0/0/1 { > scheduler-map CoS-MLPPP; > } to this: > class-of-service{ [..] > interfaces { > e1-0/0/0 { unit 0 <<<<<<< add this > scheduler-map CoS-MLPPP; > } > e1-0/0/1 { unit 0 <<<<<<< add this > scheduler-map CoS-MLPPP; > } You may also want to consider fragmentation maps. - Dan > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > FAHAD ALI KHAN > Sent: Thursday, April 05, 2007 2:33 AM > To: juniper-nsp > Subject: [j-nsp] Class of Service implementation over MLPPP link > > > Guys....im stuck in implementing CoS over MLPPP link (E1s). > My scenario is, > CE---PE===(2E1s MLPPP)===PE---CE > My configuration is as under, > chassis { > fpc 0 { > pic 2 { > adaptive-services { > service-package layer-2; > } > } > } > interfaces { > e1-0/0/0 { > unit 0 { > family mlppp { > bundle lsq-0/2/0.0; > } > } > } > e1-0/0/1 { > unit 0 { > family mlppp { > bundle lsq-0/2/0.0; > } > } > } > interfaces lsq-0/2/0 > per-unit-scheduler; > unit 0 { > encapsulation multilink-ppp; > family inet { > address X.X.X.X/30; > } > family mpls; > } > class-of-service{ > forwarding-classes { > queue 0 Besteffort; > queue 1 Silver; > queue 2 Gold; > queue 3 NC; > } > interfaces { > e1-0/0/0 { > scheduler-map CoS-MLPPP; > } > e1-0/0/1 { > scheduler-map CoS-MLPPP; > } > lsq-0/2/0 { > unit 0 { > scheduler-map CoS-MLPPP; > classifiers { > dscp dscp > exp exp > } > rewrite-rules { > dscp dscp > exp exp > } > } > } > } > scheduler-maps { > CoS-MLPPP { > forwarding-class Besteffort scheduler MLPPP-BestEffort; > forwarding-class Silver scheduler MLPPP-Silver; > forwarding-class Gold scheduler MLPPP-Gold; > forwarding-class NC scheduler MLPPP-NC; > } > } > schedulers { > MLPPP-BestEffort { > transmit-rate percent 40; > buffer-size remainder; > priority low; > } > MLPPP-Silver { > transmit-rate percent 30; > buffer-size percent 30; > priority high; > } > MLPPP-Gold { > transmit-rate percent 25; > buffer-size remainder; > priority strict-high; > } > MLPPP-NC { > transmit-rate percent 5; > buffer-size percent 5; > priority high; > } > } > same on the other PE side.....but the problem is......when we > classified CE > traffic as Gold or Silver.....lsq interface queue stats > shows....no packets > in the queue....means...0 queue/transfered packets from lsq > queue/buffer. > Also its contituent links (E1s) shows all packets goes from its BE > queue...not in Silver (Q1) and Gold (Q2). > > Kindly check the configuration and suggest is there any > configurational > issue or some other workarround is avaiable. HW is M10i with > 10-CH-E1-IQ PIC > and AS-2 PIC. > > Regards > > Fahad > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp