Dan This is not working, even with enabling per-unit schedular on constituent link and applying schedular-map to their logical unit in Class of Service Interface hierarchy as u suggest.
Results are same, while pushing Gold, Silver or BE traffic, i.e. all goes to queue 0 (BE). And in lsq interface, there is no Queue stats available (all Queue stats are 0). show interfaces e1-0/0/0 extensive Physical interface: e1-0/0/0, Enabled, Physical link is Up Traffic statistics: Input bytes : 21834 0 bps Output bytes : 23757 0 bps Input packets: 305 0 pps Output packets: 332 0 pps Input errors: Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Giants: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, HS link CRC errors: 0, SRAM errors: 0, Resource errors: 0 Output errors: Carrier transitions: 0, Errors: 0, Drops: 0, Aged packets: 0, MTU errors: 0, Resource errors: 0 Queue counters: Queued packets Transmitted packets Dropped packets 0 Besteffort 313 313 0 1 Silver 0 0 0 2 Gold 0 0 0 3 NC 19 19 0 show interfaces e1-0/0/4 extensive Physical interface: e1-0/0/4, Enabled, Physical link is Up Input bytes : 22186 0 bps Output bytes : 23072 0 bps Input packets: 300 0 pps Output packets: 323 0 pps Input errors: Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Giants: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, HS link CRC errors: 0, SRAM errors: 0, Resource errors: 0 Output errors: Carrier transitions: 0, Errors: 0, Drops: 0, Aged packets: 0, MTU errors: 0, Resource errors: 0 Queue counters: Queued packets Transmitted packets Dropped packets 0 Besteffort 304 304 0 1 Silver 0 0 0 2 Gold 0 0 0 3 NC 19 19 0 show interfaces lsq-0/2/0 extensive Physical interface: lsq-0/2/0, Enabled, Physical link is Up Interface index: 194, SNMP ifIndex: 260, Generation: 193 Link-level type: LinkService, MTU: 1504 Device flags : Present Running Interface flags: Point-To-Point SNMP-Traps 16384 Last flapped : 2007-03-27 13:10:39 PKT (2w6d 21:56 ago) Statistics last cleared: 2007-04-17 11:04:24 PKT (00:02:34 ago) Traffic statistics: Input bytes : 54709 26760 bps Output bytes : 58396 28144 bps Input packets: 704 44 pps Output packets: 782 46 pps Frame exceptions: Oversized frames 0 Errored input frames 0 Input on disabled link/bundle 0 Output for disabled link/bundle 0 Queuing drops 0 Buffering exceptions: Packet data buffer overflow 0 Fragment data buffer overflow 0 Assembly exceptions: Fragment timeout 0 Missing sequence number 0 Out-of-order sequence number 0 Out-of-range sequence number 0 Hardware errors (sticky): Data memory error 0 Control memory error 0 Queue counters: Queued packets Transmitted packets Dropped packets 0 Besteffort 0 0 0 1 Silver 0 0 0 2 Gold 0 0 0 3 NC 0 0 0 Well is it necessary to implement the fragmentation map, multiclass or LFI settings. as we are not implementing these. Does any one has the practical implmentation experience to implement CoS over MLPPP, if yes than please share your sample configuration and comments on this issue. Thanks and Regards Fahad Ali Khan On 4/16/07, Dan Rautio <[EMAIL PROTECTED]> wrote: > > Fahad, > > Did you ever get an answer to your question? Check this out: > > http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-servic > es/html/lsq-config20.html > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp