At 6:11 PM +0300 8/6/07, Amos Rosenboim wrote: >Hello All, > >We are trying to migrate a frame relay network onto our mpls network, >based on juniper M10i routers. >We are using frame-relay-ccc encapsulation and l2circuit configuration. >The problem is that we are unable to configure dlci values below 512. >We get the following error when trying to configure units with dlci >below 512: > >CCC or TCC on this interface must have a DLCI >= 512 > >Is this a known limitation? >Can this be worked around somehow? > >This forces us to change dlci values at customers routers, which >makes the migration problematic. >Maybe the choice of ccc encapsulation is wrong, we have chose it just >because it is the first configuration we encountered. > >Any advice would be welcomed. > > >Regards > >Amos
Hi Amos Depending on hardware/software , you may be able to configure "encapsulation extended-frame-relay-ccc" , this should remove this limitation cheers Sean _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp