Hi All, I have a J2320-JH which is replacing an aging Cisco 3640. I am having trouble bringing up an x.21 leased line. It brings up the line, but in cisco terms not the protocol. It keeps telling me on my subinterface "flags: down".
Below are my cisco and juniper configs. Anyone any ideas, the isp is being particularly un-helpful. Cisco: ! interface Serial0/0 bandwidth 2048 no ip address encapsulation frame-relay no ip mroute-cache keepalive 5 no fair-queue frame-relay lmi-type ansi ! interface Serial0/0.16 point-to-point description Telstra Circuit ip address 154.32.xxx.81 255.255.255.252 no cdp enable frame-relay interface-dlci 16 IETF ! Juniper: se-1/0/1 { description Telstra; mtu 1500; encapsulation frame-relay; serial-options { clocking-mode loop; } unit 0 { description "Telstra Serial Circuit MXFS203988"; point-to-point; dlci 16; family inet { address 154.32.152.81/30; } } } Many Thanks, Lee _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp