Hello Steinar, Do you know which interface naming is available at J4350 & M10i for MLPPP ? I see ls-0/0/0 interface at J4350 and lsi.x at M10i (Includes MSPIC)
Are these ok? Thanks! Ilker -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10, 2008 1:42 PM To: [EMAIL PROTECTED] Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Load-Balance on Internet Processor II > I'm curious if anybody knows a workaround doing load balancing per > packet on an m10i. I have a J4350 2xE1 connected to a M10i 2xE1 trying > to do my best but as Juniper says; Sorry, can't be done. Load balancing will be per flow, as you have already found out. If you need to have the full 2xE1 capacity available for one single flow, you need to use multilink PPP or similar (requires AS PIC or Multiservices PIC). Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
