Yep... on J-Series, the interface naming for the Layer 2 Services interface is ls-x/x/x.
Stefan Fouant Principal Network Engineer NeuStar, Inc. - http://www.neustar.biz GPG Key ID: 0xB5E3803D On Wed, Jun 25, 2008 at 10:21 AM, Ilker YILMAZ <[EMAIL PROTECTED]> wrote: > > Hello Steinar, > > Do you know which interface naming is available at J4350 & M10i for MLPPP ? > I see ls-0/0/0 interface at J4350 and lsi.x at M10i (Includes MSPIC) > > Are these ok? > > Thanks! > Ilker > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 10, 2008 1:42 PM > To: [EMAIL PROTECTED] > Cc: juniper-nsp@puck.nether.net > Subject: Re: [j-nsp] Load-Balance on Internet Processor II > >> I'm curious if anybody knows a workaround doing load balancing per >> packet on an m10i. I have a J4350 2xE1 connected to a M10i 2xE1 trying >> to do my best but as Juniper says; > > Sorry, can't be done. Load balancing will be per flow, as you have already > found out. If you need to have the full 2xE1 capacity available for one > single flow, you need to use multilink PPP or similar (requires AS PIC or > Multiservices PIC). > > Steinar Haug, Nethelp consulting, [EMAIL PROTECTED] > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp